Modified: php/phpruntests/trunk/Doxyfile
===================================================================
--- php/phpruntests/trunk/Doxyfile	2009-07-20 14:38:48 UTC (rev 284439)
+++ php/phpruntests/trunk/Doxyfile	2009-07-20 14:48:02 UTC (rev 284440)
@@ -38,7 +38,7 @@
 # If a relative path is entered, it will be relative to the location
 # where doxygen was started. If left blank the current directory will be used.

-OUTPUT_DIRECTORY       = docs
+OUTPUT_DIRECTORY       = _docs

 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
 # 4096 sub-directories (in 2 levels) under the output directory of each output
@@ -647,7 +647,7 @@
 # Note: To get rid of all source code in the generated output, make sure also
 # VERBATIM_HEADERS is set to NO.

-SOURCE_BROWSER         = NO
+SOURCE_BROWSER         = YES

 # Setting the INLINE_SOURCES tag to YES will include the body
 # of functions and classes directly in the documentation.
@@ -658,19 +658,19 @@
 # doxygen to hide any special comment blocks from generated source code
 # fragments. Normal C and C++ comments will always remain visible.

-STRIP_CODE_COMMENTS    = YES
+STRIP_CODE_COMMENTS    = NO

 # If the REFERENCED_BY_RELATION tag is set to YES
 # then for each documented function all documented
 # functions referencing it will be listed.

-REFERENCED_BY_RELATION = NO
+REFERENCED_BY_RELATION = YES

 # If the REFERENCES_RELATION tag is set to YES
 # then for each documented function all documented entities
 # called/used by that function will be listed.

-REFERENCES_RELATION    = NO
+REFERENCES_RELATION    = YES

 # If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
 # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
@@ -691,7 +691,7 @@
 # will generate a verbatim copy of the header file for each class for
 # which an include is specified. Set to NO to disable this.

-VERBATIM_HEADERS       = YES
+VERBATIM_HEADERS       = NO

 #---------------------------------------------------------------------------
 # configuration options related to the alphabetical class index
@@ -701,7 +701,7 @@
 # of all compounds will be generated. Enable this if the project
 # contains a lot of classes, structs, unions or interfaces.

-ALPHABETICAL_INDEX     = NO
+ALPHABETICAL_INDEX     = YES

 # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
@@ -867,7 +867,7 @@
 # releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE
 # respectively.

-GENERATE_TREEVIEW      = NONE
+GENERATE_TREEVIEW      = FRAME

 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
 # used to set the initial width (in pixels) of the frame in which the tree
@@ -1117,7 +1117,7 @@
 # evaluate all C-preprocessor directives found in the sources and include
 # files.

-ENABLE_PREPROCESSING   = YES
+ENABLE_PREPROCESSING   = NO

 # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
 # names in the source code. If set to NO (the default) only conditional
@@ -1135,7 +1135,7 @@
 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
 # in the INCLUDE_PATH (see below) will be search if a #include is found.

-SEARCH_INCLUDES        = YES
+SEARCH_INCLUDES        = NO

 # The INCLUDE_PATH tag can be used to specify one or more directories that
 # contain include files that are not input files but should be processed by
@@ -1321,7 +1321,7 @@
 # the time of a run. So in most cases it will be better to enable call graphs
 # for selected functions only using the \callgraph command.

-CALL_GRAPH             = NO
+CALL_GRAPH             = YES

 # If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
 # doxygen will generate a caller dependency graph for every global function
@@ -1329,7 +1329,7 @@
 # the time of a run. So in most cases it will be better to enable caller
 # graphs for selected functions only using the \callergraph command.

-CALLER_GRAPH           = NO
+CALLER_GRAPH           = YES

 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
 # will graphical hierarchy of all classes instead of a textual one.

Modified: php/phpruntests/trunk/build.xml
===================================================================
--- php/phpruntests/trunk/build.xml	2009-07-20 14:38:48 UTC (rev 284439)
+++ php/phpruntests/trunk/build.xml	2009-07-20 14:48:02 UTC (rev 284440)
@@ -1,23 +1,35 @@
 <?xml version="1.0"?>

-<project name="runtests" default="test" basedir=".">
+<project name="runtests" default="qa" basedir=".">

-  <property name="build.dir" value="_build" />
+  <target name="clean">
+    <delete dir="_compare" />
+    <delete dir="_coverage" />
+    <delete dir="_docs" />
+    <delete dir="_sniff" />
+    <delete dir="QA/ext" />
+    <delete dir="QA/sapi" />
+    <delete dir="QA/tests" />
+    <delete dir="QA/Zend" />
+  </target>
+
+  <target name="qa" depends="lint, test, coverage, compare, doc" description="Perform quality assurance.">
+  </target>

-  <target name="doc" description="Create API documentation in docs/html/.">
-    <delete dir="docs" />
-    <exec command="doxygen" />
+  <target name="doc" description="Create API documentation in _docs/html/.">
+    <delete dir="_docs" />
+    <exec command="doxygen" checkReturn="true"/>
   </target>

-  <target name="lint" description="Run a lint check on all PHP files.">
-    <phplint>
+  <target name="lint" description="Lint check all PHP files.">
+    <phplint haltonfailure="true">
       <fileset dir="src">
         <include name="*.php"/>
         <include name="**/*.php"/>
       </fileset>
     </phplint>

-    <phplint>
+    <phplint haltonfailure="true">
       <fileset dir="tests">
         <include name="*.php"/>
         <include name="**/*.php"/>
@@ -26,32 +38,37 @@
   </target>

   <target name="test" description="Run all unit tests.">
-    <delete dir="coverage" />
-    <exec command="phpunit --coverage-html coverage tests" passthru="true" />
+    <delete dir="_coverage" />
+    <exec command="phpunit tests" passthru="true" checkReturn="true"/>
   </target>

-  <target name="sniff" description="Run all PHP_CodeSniffer sniffs.">
-    <exec command="phpcs -n --extensions=php --standard=${project.basedir}/cs/all src" passthru="true" />
+  <target name="coverage" description="Create code coverage report in _coverage.">
+    <delete dir="_coverage" />
+    <exec command="phpunit --coverage-html _coverage tests" />
   </target>

-  <target name="sniff-compatibility" description="Run PHP_CodeSniffer compatibility sniffs.">
-    <exec command="phpcs -n --extensions=php --standard=${project.basedir}/cs/compatibility src" passthru="true" />
-  </target>
+  <target name="compare" description="Old/New comparison of phpt results.">
+    <fail unless="php" message="Path to PHP executable not defined, use -Dphp=/path/to/php" />

-  <target name="sniff-formatting" description="Run PHP_CodeSniffer formatting sniffs.">
-    <exec command="phpcs -n --extensions=php --standard=${project.basedir}/cs/formatting src" passthru="true" />
-  </target>
+    <delete dir="_compare" />
+    <mkdir dir="_compare" />

-  <target name="sniff-naming" description="Run PHP_CodeSniffer naming sniffs.">
-    <exec command="phpcs -n --extensions=php --standard=${project.basedir}/cs/naming src" passthru="true" />
-  </target>
+    <delete dir="QA/ext" />
+    <delete dir="QA/sapi" />
+    <delete dir="QA/tests" />
+    <delete dir="QA/Zend" />

-  <target name="sniff-documentation" description="Run PHP_CodeSniffer documentation sniffs.">
-    <exec command="phpcs -n --extensions=php --standard=${project.basedir}/cs/documentation src" passthru="true" />
+    <exec command="tar xfz QATESTS.tgz" dir="QA" passthru="true" />
+    <exec command="${php} run-tests.php -p ${php} Zend ext sapi tests > ${project.basedir}/_compare/old.out" dir="QA" passthru="true" checkReturn="true"/>
+    <exec command="${php} ${project.basedir}/src/run-tests.php -p ${php} -o csv -s ${project.basedir}/_compare/new.out QA" dir="${project.basedir}" passthru="true" checkReturn="true" />
+    <exec command="${php} QA/compareNewOld.php ${project.basedir}/_compare/new.out ${project.basedir}/_compare/old.out QA  > ${project.basedir}/_compare/compare.out" dir="${project.basedir}" passthru="true" checkReturn="true"/>
   </target>

-  <target name="sniff-guidelines" description="Run PHP_CodeSniffer guidelines sniffs.">
-    <exec command="phpcs -n  --extensions=php --standard=${project.basedir}/cs/guidelines src" passthru="true" />
+  <target name="sniff" description="Run all PHP_CodeSniffer sniffs.">
+    <delete dir="_sniff" />
+    <mkdir dir="_sniff" />
+
+    <exec command="phpcs -n --extensions=php --report=full src > ${project.basedir}/_sniff/sniff.out" passthru="true"/>
   </target>

 </project>