Bug #2296 Updated: Crashes when using VirtualHost with Apache 1.3.9

ID: 2296 Updated by: sander@php.net Reported By: cgriffin@dka.com -Status: Open +Status: Bogus Bug Type: Reproducible Crash Operating System: RedHat 6 PHP Version: 3.0.12 New Comment: Thank you for taking the time to report a problem with PHP. Unfortunately, PHP 3 is no longer supported. Please download the latest version of PHP 4 from http://www.php.net/downloads.php If you are able to reproduce the bug with one of the latest versions of PHP, please change the PHP version on this bug report to the version you tested and change the status back to "Open". Again, thank you for your continued support of PHP. Previous Comments: ------------------------------------------------------------------------ [1999-09-15 18:43:10] cgriffin@dka.com Ok... at first I thought you might be right about the apache 1.3.6 thing. So I carefully reproduced the problem. I did some trouble shooting and found that it only happens with the following combination: apache 1.3.9 one or more VirtualHost declarations --with-mycrypt and i looked at the code using the backtrace as a reference and it is crashing when it tries to close the php.ini file. ------------------------------------------------------------------------ [1999-09-15 07:22:36] rasmus@cvs.php.net I bet you didn't recompile PHP against Apache-1.3.9. If you use the PHP DSO compiled against Apache-1.3.6 and LoadModule it into Apache-1.3.9 this is exactly what I would expect to see. Make sure you do a full configure; make; make install of Apache-1.3.9 so you get the updated apxs script from Apache-1.3.9 installed and then do a make clean in your PHP src directory and do a full configure; make; make install of PHP. ------------------------------------------------------------------------ [1999-09-14 14:48:35] cgriffin@dka.com When I use php 3.0.12 with Apache 1.3.9 it crashes when I put a VirtualHost command in the config file. If I leave out the VirtualHost Apache starts fine. If I put the VirtualHost in and remove PHP Apache starts fine. If I roll back to Apache 1.3.6 it starts fine. ./configure --prefix=/www/php \ --with-apxs=/www/server/bin/apxs \ --with-config-file-path=/www/php/conf \ --enable-track-vars \ --with-exec-dir=/www/php/bin \ --with-gd \ --with-mcrypt \ --with-pgsql #0 0x4030e3e8 in ?? () #1 0x400f61f6 in _IO_old_file_close_it (fp=0x80bbe98) at oldfileops.c:143 #2 0x400f2595 in _IO_old_fclose (fp=0x80bbe98) at oldiofclose.c:43 #3 0x401fa493 in php3_init_config () at configuration-parser.y:221 #4 0x401f1a0b in php3_config_ini_startup () at main.c:965 #5 0x401f24e0 in php3_module_startup () at main.c:1246 #6 0x401efcb8 in php3_create_dir () #7 0x80561d3 in ap_single_module_configure () #8 0x804f4c0 in load_module () #9 0x8054aae in invoke_cmd () #10 0x8055393 in ap_handle_command () #11 0x8055427 in ap_srm_command_loop () #12 0x8055830 in ap_process_resource_config () #13 0x80560f2 in ap_read_config () #14 0x805f841 in standalone_main () #15 0x80600a3 in main () #16 0x400b6cb3 in __libc_start_main (main=0x805fd6c <main>, argc=1, argv=0xbffffd64, init=0x804e890 <_init>, fini=0x8093d6c <_fini>, rtld_fini=0x4000a350 <_dl_fini>, stack_end=0xbffffd5c) at ../sysdeps/generic/libc-start.c:78 ;;;;;;;;;;;;;;;;;;; ; About this file ; ;;;;;;;;;;;;;;;;;;; ; This file controls many aspects of PHP's behavior. In order for PHP to ; read it, it must be named 'php.ini'. PHP looks for it in the current ; working directory, in the path designated by the environment variable ; PHPRC, and in the path that was defined in compile time (in that order). ; Under Windows, the compile-time path is the Windows directory. The ; path in which the php.ini file is looked for can be overriden using ; the -c argument in command line mode. ; ; The syntax of the file is extremely simple. Whitespace and Lines ; beginning with a semicolon are silently ignored (as you probably guessed). ; Section headers (e.g. [Foo]) are also silently ignored, even though ; they might mean something in the future (they probably won't). ; ; Options are specified using the syntax key = value or key = "complex value". ; Key names are *case sensitive*. foo = bar is different from FOO = bar. ; 'value' can be any number, word or keyword (keywords are On, Off, True, ; False, Yes and No, and are case insensitive). ; 'complex value' can be just about anything, expcept for " and a newline ; Boolean flags can be turned on using the values 1, On, True or Yes. ; They can be turned off using the values 0, Off, False or No. ; ; All the values in the php.ini-dist file correspond to the builtin ; defaults (that is, if no php.ini is used, or if you delete these lines, ; the builtin defaults will be identical). ;;;;;;;;;;;;;;;;;;;; ; Language Options ; ;;;;;;;;;;;;;;;;;;;; engine = On ; Enable the PHP scripting language engi ne under Apache short_open_tag = Off ; allow the <? tag. otherwise, only <?php and < script> tags are recognized. asp_tags = Off ; allow ASP-style <% %> tags precision = 14 ; number of significant digits displayed in floating point numbers y2k_compliance = Off ; whether to be year 2000 compliant (will cause problems with non y2k compliant browsers) ; Safe Mode safe_mode = Off safe_mode_exec_dir = ; Colors for Syntax Highlighting mode. Anything that's acceptable in <font colo r=???> would work. highlight.string = #DD0000 highlight.comment = #FF8000 highlight.keyword = #007700 highlight.bg = #FFFFFF highlight.default = #0000BB highlight.html = #000000 ; Misc allow_builtin_links = Off ; Sets whether phpinfo() will ge nerate built-in links that display the PHP ; and Zend logos , and tells PHP whether to honor them or not. ; It is no secur ty threat in any way, but it make sit possible ; to determine w hether you use PHP on your server or not. ;;;;;;;;;;;;;;;;;;; ; Resource Limits ; ;;;;;;;;;;;;;;;;;;; max_execution_time = 30 ; Maximum execution time of each script, in seconds (UNIX only) memory_limit = 8388608 ; Maximum amount of memory a script may consume (8MB) ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; Error handling and logging ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; error_reporting is a bit-field. Add each number up to get desired error repor ting level ; 1 = Normal errors ; 2 = Normal warnings ; 4 = Parser errors ; 8 = Notices - warnings you can ignore, but sometimes imply a bug (e.g., using an uninitialized variable) error_reporting = 7 display_errors = On ; Print out errors (as a part of the HTML script ) log_errors = On ; Log errors into a log file (server-spe cific log, stderr, or error_log (below)) track_errors = Off ; Store the last error/warning message in $php_e rrormsg (boolean) error_prepend_string = "<font color=ff0000>" ; string to output before an erro r message error_append_string = "</font>" ; string to output after an error message ;error_log = filename ; log errors to specified file error_log = syslog ; log errors to syslog (Event Log on NT, not valid in Windows 95) warn_plus_overloading = Off ; warn if the + operator is used with strings ;;;;;;;;;;;;;;;;; ; Data Handling ; ;;;;;;;;;;;;;;;;; magic_quotes_gpc = On ; magic quotes for incoming GET/ POST/Cookie data magic_quotes_runtime= Off ; magic quotes for runtime-generated dat a, e.g. data from SQL, from exec(), etc. magic_quotes_sybase = Off ; Use Sybase-style magic quotes (escape ' with '' instead of \') track_vars = On ; enable $HTTP_GET_VARS[ ], $HTTP_POST_VARS[] and $HTTP_COOKIE_VARS[] arrays ; automatically add files before or after any PHP 3.0 document auto_prepend_file = auto_append_file = ;;;;;;;;;;;;;;;;;;;;;;;;; ; Paths and Directories ; ;;;;;;;;;;;;;;;;;;;;;;;;; include_path = "./:/www/php/include" ; UNIX: "/path1:/path2" Windows: "\path1;\path2" doc_root = ; the root of th e php pages, used only if nonempty user_dir = ; the directory under which php opens the script using /~username, used only if nonempty ;upload_tmp_dir = ; temporary directory for HTTP uploaded files (will use system default if not specified) upload_max_filesize = 2097152 ; 2 Meg default limit on file uploads extension_dir = ./ ; directory in which the loadable extensions (modules) reside ;;;;;;;;;;;;;;;;;;;;;; ; Dynamic Extensions ; ;;;;;;;;;;;;;;;;;;;;;; ; if you wish to have an extension loaded automaticly, use the ; following syntax: extension=modulename.extension ; for example, on windows, ; extension=msql.dll ; or under UNIX, ; extension=msql.so ; Note that it should be the name of the module only, no directory information ; needs to go here. Specify the location of the extension with the extension_di r directive above. ;Windows Extensions ;extension=php_mysql.dll ;extension=php_nsmail.dll ;extension=php_calendar.dll ;extension=php_dbase.dll ;extension=php_filepro.dll ;extension=php_gd.dll ;extension=php_dbm.dll ;extension=php_mssql.dll ;extension=php_zlib.dll ;extension=php_filepro.dll ;extension=php_imap4r2.dll ;extension=php_ldap.dll ;extension=php_crypt.dll ;extension=php_msql2.dll ;extension=php_odbc.dll ;;;;;;;;;;;;;;;;;;; ; Module Settings ; ;;;;;;;;;;;;;;;;;;; [Syslog] define_syslog_variables = Off ; Whether or not to define the various syslog va riables, ; e.g. $LOG_PID, $LOG_CRON, etc. Turning it off is a ; good idea perf ormance-wise. In runtime, you can define ; these variable s by calling define_syslog_variables() [mail function] SMTP = localhost ;for win32 only sendmail_from = me@localhost.com ;for win32 only sendmail_path = ;for unix only, may supply arguments as well (default is sendmail -t) [Debugger] debugger.host = 207.67.207.131 debugger.port = 7869 debugger.enabled = False [Logging] ; These configuration directives are used by the example logging mechanism. ; See examples/README.logging for more explanation. ;logging.method = db ;logging.directory = /path/to/log/directory [SQL] sql.safe_mode = Off [ODBC] ;uodbc.default_db = Not yet implemented ;uodbc.default_user = Not yet implemented ;uodbc.default_pw = Not yet implemented uodbc.allow_persistent = On ; allow or prevent persistent links uodbc.max_persistent = -1 ; maximum number of persistent links. -1 means no limit uodbc.max_links = -1 ; maximum number of links (persi stent+non persistent). -1 means no limit uodbc.defaultlrl = 4096 ; Handling of LONG fields. Returns numbe r of bytes to variables, 0 means passthru uodbc.defaultbinmode = 1 ; Handling of binary data. 0 means passt hru, 1 return as is, 2 convert to char ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation of uodbc.defaultlrl ; and uodbc.defaultbinmode [MySQL] mysql.allow_persistent = On ; allow or prevent persistent link mysql.max_persistent = -1 ; maximum number of persistent links. -1 means no limit mysql.max_links = -1 ; maximum number of links (persi stent+non persistent). -1 means no limit mysql.default_port = ; default port number for mysql_ connect(). If unset, ; mysql_connect( ) will use the $MYSQL_TCP_PORT, or the mysql-tcp ; entry in /etc/ services, or the compile-time defined MYSQL_PORT ; (in that order ). Win32 will only look at MYSQL_PORT. mysql.default_host = ; default host for mysql_connect () (doesn't apply in safe mode) mysql.default_user = ; default user for mysql_connect () (doesn't apply in safe mode) mysql.default_password = ; default password for mysql_connect() ( doesn't apply in safe mode) ; Note that this is generally a *bad* idea to store passwords ; in this file. *Any* user with PHP access can run ; 'echo cfg_get_ var("mysql.default_password")' and reveal that ; password! And of course, any users with read access to this ; file will be a ble to reveal the password as well. [mSQL] msql.allow_persistent = On ; allow or prevent persistent link msql.max_persistent = -1 ; maximum number of persistent l inks. -1 means no limit msql.max_links = -1 ; maximum number of links (persi stent+non persistent). -1 means no limit [PostgresSQL] pgsql.allow_persistent = On ; allow or prevent persistent link pgsql.max_persistent = -1 ; maximum number of persistent links. -1 means no limit pgsql.max_links = -1 ; maximum number of links (persi stent+non persistent). -1 means no limit [Sybase] sybase.allow_persistent = On ; allow or prevent persistent link sybase.max_persistent = -1 ; maximum number of persistent links. -1 means no limit sybase.max_links = -1 ; maximum number of links (persi stent+non persistent). -1 means no limit ;sybase.interface_file = "/usr/sybase/interfaces" sybase.min_error_severity = 10 ; minimum error severity to disp lay sybase.min_message_severity = 10 ; minimum message severity to di splay sybase.compatability_mode = Off ; compatability mode with earlier versio ns of PHP 3.0. ; If on, this will cause PHP to automatically assign types to results ; accord ing to their Sybase type, instead of treating them all as ; string s. This compatability mode will probably not stay around ; foreve r, so try applying whatever necessary changes to your code, ; and tu rn it off. [Sybase-CT] sybct.allow_persistent = On ; allow or prevent persistent li nk sybct.max_persistent = -1 ; maximum number of persistent l inks. -1 means no limit sybct.max_links = -1 ; maximum number of link s (persistent+non persistent). -1 means no limit sybct.min_server_severity = 10 ; minimum server message severit y to display sybct.min_client_severity = 10 ; minimum client message severit y to display [bcmath] bcmath.scale = 0 ; number of decimal digits for all bcmath functi ons [browscap] ;browscap = extra/browscap.ini [Informix] ifx.default_host = ; default host for ifx_connect() (doesn't apply in safe mode) ifx.default_user = ; default user for ifx_connect() (doesn't apply in safe mode) ifx.default_password = ; default password for ifx_conne ct() (doesn't apply in safe mode) ifx.allow_persistent = On ; allow or prevent persistent li nk ifx.max_persistent = -1 ; maximum number of persistent l inks. -1 means no limit ifx.max_links = -1 ; maximum number of links (persi stent+non persistent). -1 means no limit ifx.textasvarchar = 0 ; if set on, select statements r eturn the contents of a text blob instead of it's id ifx.byteasvarchar = 0 ; if set on, select statements r eturn the contents of a byte blob instead of it's id ifx.charasvarchar = 0 ; trailing blanks are stripped f rom fixed-length char columns. May help the life ; of Informix SE users. ifx.blobinfile = 0 ; if set on, the contents of tex t&byte blobs are dumped to a file instead of ; keeping them in memory ifx.nullformat = 0 ; NULL's are returned as empty s trings, unless this is set to 1. In that case, ; NULL's are returned as string 'NULL'. [Session] session.save_handler = files ; handler used to store/retrieve data session.save_path = /tmp ; argument passed to save_handler ; in the case of files, this is the ; path where data files are stored session.name = PHPSESSID ; name of the session ; is used as cookie name session.auto_start = 0 ; initialize session on request startup session.lifetime = 0 ; lifetime in seconds of cookie ; or if 0, until browser is restarted session.serialize_handler = php ; handler used to serialize data ; php is the standard serializer of PHP session.gc_probability = 1 ; procentual probability that the ; 'garbage collection' process is started ; on every session initialization session.gc_maxlifetime = 1440 ; after this number of seconds, stored ; data will be seen as 'garbage' and ; cleaned up by the gc process ------------------------------------------------------------------------ -- Edit this bug report at http://bugs.php.net/?id=2296&edit=1