Bug #17647 Updated: "make" searches for /zend_language_parser.c

ID: 17647 Updated by: michael.mauch@gmx.de Reported By: michael.mauch@gmx.de -Status: Feedback +Status: Open Bug Type: Compile Failure Operating System: OSF1 Tru64 4.0 PHP Version: 4.3.0-dev New Comment: The first 4 lines of the Makefile: srcdir = /house/elmicha/local/src/php4-200206181200 builddir = /house/elmicha/spe145/build top_srcdir = /house/elmicha/local/src/php4-200206181200 top_builddir = /house/elmicha/spe145/build I built in a separate build directory, the configure line was ~/local/src/php4-200206181200/configure --prefix=/house/elmicha/spe145 I also tried to give --srcdir, but no change in Makefile.objects. The same when I built directly in the directory where configure is. I can report a few more observations; maybe this helps finding the source of the problem. The problematic lines in the configure script are the lines 78909 and below (in php4-200206181200): case /Zend in "") ac_srcdir="$abs_srcdir/"; unset ac_bdir; ac_inc="-I. -I$abs_srcdir" ;; /*) ac_srcdir=echo $ac_n "/Zend$ac_c"|cut -c 2-"/"; ac_bdir=$ac_srcdir; ac_inc="-I$ac_bdir -I$abs_srcdir/$ac_bdir" ;; *) ac_srcdir="$abs_srcdir//Zend/"; ac_bdir="/Zend/"; ac_inc="-I$ac_bdir -I$ac_srcdir" ;; esac If I put set +x echo "ac_n: $ac_n" echo "ac_c: $ac_c" before these lines and a "exit 27" behind them, I get on Linux: + echo 'ac_n: -n' ac_n: -n + echo 'ac_c: ' ac_c: ++ echo -n /Zend ++ cut -c 2- + ac_srcdir=Zend/ + ac_bdir=Zend/ + ac_inc=-IZend/ -I/usr/local/src/php4-200206181200/Zend/ + exit 27 On Tru64 (both 4.0 and 5.1) I get: + echo ac_n: ac_n: + echo ac_c: \c ac_c: + + cut -c 2- + echo /Zend\c ac_srcdir=/ + ac_bdir=/ + ac_inc=-I/ -I/house/elmicha/local/src/php4-200206181200// + exit 27 So the "echo $ac_n "/Zend$ac_c"|cut -c 2-" is not working as expected on Tru64, it results in an empty string instead of the expected "Zend". A few other datapoints from inside the configure on Tru64; I added the following lines: set -x type echo echo $SHELL echo $CONFIG_SHELL And got: + whence -v echo echo is a shell builtin + echo /bin/sh /bin/sh + echo Hmm, I still don't know what's going on. But /bin/sh is the oldest, ugliest, broke shell that's on this machine - why isn't the configure script finding /bin/ksh, or /usr/bin/bash? I tried /bin/ksh configure ..., but no difference. Previous Comments: ------------------------------------------------------------------------ [2002-06-18 17:55:48] sniper@php.net What are the first 4 lines in the Makefile for you? And what was the exact configure line used? No funky defines? :) --Jani ------------------------------------------------------------------------ [2002-06-18 16:11:45] michael.mauch@gmx.de s/bus/bug in the comment above. ------------------------------------------------------------------------ [2002-06-18 16:09:56] michael.mauch@gmx.de GNU bison-1.35 and flex-2.5.4 are installed, but the bus still persists with php4-200206181200: cc -Imain/ -I/house/elmicha/local/src/php4-200206181200/main/ -DPHP_ATOM_INC -I/house/elmicha/local/src/php4-200206181200/include -I/house/elmicha/local/src/php4-200206181200/main -I/house/elmicha/local/src/php4-200206181200 -I/house/elmicha/local/src/php4-200206181200/Zend -I/house/elmicha/local/src/php4-200206181200/ext/xml/expat -I/house/elmicha/local/src/php4-200206181200/TSRM -g -c /house/elmicha/local/src/php4-200206181200/main/user_streams.c -o main/user_streams.o && echo > main/user_streams.lo Make: Don't know how to make /zend_language_parser.c. Stop. ------------------------------------------------------------------------ [2002-06-17 21:31:44] sniper@php.net This should be fixed now..can you test the latest snapshot: http://snaps.php.net/php4-latest.tar.gz (it does not contain the flex/bison generated files, so you need to have those tools installed) ------------------------------------------------------------------------ [2002-06-07 15:40:59] michael.mauch@gmx.de This bug report is for php4-200206070600, but I couldn't choose that value. php-4.2.1 has no problems wrt this. "configure" produces a Makefile.objects with some faulty lines like: /internal_functions.lo: /internal_functions.c $(CC) -I/ -I/house/elmicha/local/php4-200206070600// $(COMMON_FLAGS) $(CFLAGS_CLEAN) $(EXTRA_CFLAGS) -c /internal_functions.c -o /internal_functions.o && echo > $@ /internal_functions_cli.lo: /internal_functions_cli.c $(CC) -I/ -I/house/elmicha/local/php4-200206070600// $(COMMON_FLAGS) $(CFLAGS_CLEAN) $(EXTRA_CFLAGS) -c /internal_functions_cli.c -o /internal_functions_cli.o && echo > $@ /zend_language_parser.lo: /zend_language_parser.c $(CC) -I/ -I/house/elmicha/local/php4-200206070600// $(COMMON_FLAGS) $(CFLAGS_CLEAN) $(EXTRA_CFLAGS) -c /zend_language_parser.c -o /zend_language_parser.o && echo > $@ /zend_language_scanner.lo: /zend_language_scanner.c $(CC) -I/ -I/house/elmicha/local/php4-200206070600// $(COMMON_FLAGS) $(CFLAGS_CLEAN) $(EXTRA_CFLAGS) -c /zend_language_scanner.c -o /zend_language_scanner.o && echo > $@ /zend_ini_parser.lo: /zend_ini_parser.c $(CC) -I/ -I/house/elmicha/local/php4-200206070600// $(COMMON_FLAGS) $(CFLAGS_CLEAN) $(EXTRA_CFLAGS) -c /zend_ini_parser.c -o /zend_ini_parser.o && echo > $@ /zend_ini_scanner.lo: /zend_ini_scanner.c $(CC) -I/ -I/house/elmicha/local/php4-200206070600// $(COMMON_FLAGS) $(CFLAGS_CLEAN) $(EXTRA_CFLAGS) -c /zend_ini_scanner.c -o /zend_ini_scanner.o && echo > $@ This makes the compile fail with this error message: cc -Imain/ -I/house/elmicha/local/php4-200206070600/main/ -DPHP_ATOM_INC -I/house/elmicha/local/php4-200206070600/include -I/house/elmicha/local/php4-200206070600/main -I/house/elmicha/local/php4-200206070600 -I/house/elmicha/local/php4-200206070600/Zend -I/house/elmicha/local/php4-200206070600/ext/xml/expat -I/house/elmicha/local/php4-200206070600/TSRM -g -c /house/elmicha/local/php4-200206070600/main/user_streams.c -o main/user_streams.o && echo > main/user_streams.lo Make: Don't know how to make /zend_language_parser.c. Stop. Installing GNU bison and flex did not help, neither did "configure --src-dir=/house/elmicha/local/php4-200206070600" change anything. As a workaround, I changed the configure script: bash-2.05$ diff -ub php4-200206070600/configure php4-200206070600.new --- php4-200206070600/configure Fri Jun 7 09:00:23 2002 +++ php4-200206070600.new/configure Fri Jun 7 14:51:51 2002 @@ -78828,7 +78828,7 @@ case /main in "") ac_srcdir="$abs_srcdir/"; unset ac_bdir; ac_inc="-I. -I$abs_srcdir" ;; - /*) ac_srcdir=echo $ac_n "/main$ac_c"|cut -c 2-"/"; ac_bdir=$ac_srcdir; ac_inc="-I$ac_bdir -I$abs_srcdir/$ac_bdir" ;; + /*) ac_srcdir=echo $ac_n "/main"|cut -c 2-"/"; ac_bdir=$ac_srcdir; ac_inc="-I$ac_bdir -I$abs_srcdir/$ac_bdir" ;; *) ac_srcdir="$abs_srcdir//main/"; ac_bdir="/main/"; ac_inc="-I$ac_bdir -I$ac_srcdir" ;; esac @@ -78869,7 +78869,7 @@ case /main in "") ac_srcdir="$abs_srcdir/"; unset ac_bdir; ac_inc="-I. -I$abs_srcdir" ;; - /*) ac_srcdir=echo $ac_n "/main$ac_c"|cut -c 2-"/"; ac_bdir=$ac_srcdir; ac_inc="-I$ac_bdir -I$abs_srcdir/$ac_bdir" ;; + /*) ac_srcdir=echo $ac_n "/main"|cut -c 2-"/"; ac_bdir=$ac_srcdir; ac_inc="-I$ac_bdir -I$abs_srcdir/$ac_bdir" ;; *) ac_srcdir="$abs_srcdir//main/"; ac_bdir="/main/"; ac_inc="-I$ac_bdir -I$ac_srcdir" ;; esac @@ -78911,7 +78911,7 @@ case /Zend in "") ac_srcdir="$abs_srcdir/"; unset ac_bdir; ac_inc="-I. -I$abs_srcdir" ;; - /*) ac_srcdir=echo $ac_n "/Zend$ac_c"|cut -c 2-"/"; ac_bdir=$ac_srcdir; ac_inc="-I$ac_bdir -I$abs_srcdir/$ac_bdir" ;; + /*) ac_srcdir=echo $ac_n "/Zend"|cut -c 2-"/"; ac_bdir=$ac_srcdir; ac_inc="-I$ac_bdir -I$abs_srcdir/$ac_bdir" ;; *) ac_srcdir="$abs_srcdir//Zend/"; ac_bdir="/Zend/"; ac_inc="-I$ac_bdir -I$ac_srcdir" ;; esac This makes "make" happy, but of course this is not the correct solution. ------------------------------------------------------------------------ -- Edit this bug report at http://bugs.php.net/?id=17647&edit=1