CVS update: php3/doc/chapters

Date: Saturday December 26, 1998 @ 10:34 Author: eschmid Update of /repository/php3/doc/chapters In directory asf:/u/temp/cvs-serv4546 Modified Files: install.sgml Log Message: Linebreaks and removed path from --with-mysql=/usr/local/mysql DIR is replaceable. If I use a Path, than Apache can't find -lmysqlclient Index: php3/doc/chapters/install.sgml diff -c php3/doc/chapters/install.sgml:1.34 php3/doc/chapters/install.sgml:1.35 *** php3/doc/chapters/install.sgml:1.34 Sat Dec 19 14:42:48 1998 --- php3/doc/chapters/install.sgml Sat Dec 26 10:34:49 1998 *************** *** 27,37 **** </sect2> <sect2> ! <title>Quick Installation Instructions (Apache Module Version)</title> ! <para> ! <informalexample> ! <programlisting> 1. gunzip apache_1.3.x.tar.gz 2. tar xvf apache_1.3.x.tar 3. gunzip php-3.0.x.tar.gz --- 27,37 ---- </sect2> <sect2> ! <title>Quick Installation Instructions (Apache Module Version)</title> + <para> + <informalexample> + <programlisting> 1. gunzip apache_1.3.x.tar.gz 2. tar xvf apache_1.3.x.tar 3. gunzip php-3.0.x.tar.gz *************** *** 39,74 **** 5. cd apache_1.3.x 6. ./configure --prefix=/www 7. cd ../php-3.0.x ! 8. ./configure --with-mysql=/usr/local/mysql --with-apache=../apache_1.3.x --enable-track-vars 9. make 10. make install 11. cd ../apache_1.3.x 12. ./configure --prefix=/www --activate-module=src/modules/php3/libphp3.a 13. make 14. make install ! Instead of this step you may prefer to simply copy the httpd binary overtop ! of your existing binary. Make sure you shut down your server first though. 15. cd ../php-3.0.x 16. cp php3.ini-dist /usr/local/lib/php3.ini ! You can edit /usr/local/lib/php3.ini file to set PHP options. ! If you prefer this file in another location, use --with-config-file=/path in step 8. 17. Edit your httpd.conf or srm.conf file and add: AddType application/x-httpd-php3 .php3 ! You can choose any extension you wish here. .php3 is simply the one we suggest. 18. Use your normal procedure for starting the Apache server. (You must ! stop and restart the server, not just cause the server to reload by ! use a HUP or USR1 signal.) - </programlisting> - </informalexample> - </para> </sect2> <sect2> <title>Configuration</title> <para> --- 39,80 ---- 5. cd apache_1.3.x 6. ./configure --prefix=/www 7. cd ../php-3.0.x ! 8. ./configure --with-mysql --with-apache=../apache_1.3.x --enable-track-vars 9. make 10. make install 11. cd ../apache_1.3.x 12. ./configure --prefix=/www --activate-module=src/modules/php3/libphp3.a 13. make 14. make install ! ! Instead of this step you may prefer to simply copy the httpd binary ! overtop of your existing binary. Make sure you shut down your ! server first though. 15. cd ../php-3.0.x 16. cp php3.ini-dist /usr/local/lib/php3.ini ! ! You can edit /usr/local/lib/php3.ini file to set PHP options. If ! you prefer this file in another location, use ! --with-config-file=/path in step 8. 17. Edit your httpd.conf or srm.conf file and add: AddType application/x-httpd-php3 .php3 ! You can choose any extension you wish here. .php3 is simply the one ! we suggest. 18. Use your normal procedure for starting the Apache server. (You must ! stop and restart the server, not just cause the server to reload by ! use a HUP or USR1 signal.) ! </programlisting> ! </informalexample> ! </para> </sect2> + <sect2> <title>Configuration</title> <para> *************** *** 103,110 **** <title>Apache module</title> <para> ! To build PHP3 as an Apache module, answer "yes" to "Build as an Apache ! module?" (the <option><link linkend="with-apache"> --with-apache</link>=<replaceable>DIR</replaceable></option> option to configure) and specify the Apache distribution base directory. If you have unpacked your Apache distribution in --- 109,116 ---- <title>Apache module</title> <para> ! To build PHP3 as an Apache module, answer "yes" to "Build as an ! Apache module?" (the <option><link linkend="with-apache"> --with-apache</link>=<replaceable>DIR</replaceable></option> option to configure) and specify the Apache distribution base directory. If you have unpacked your Apache distribution in *************** *** 117,130 **** <title>fhttpd module</title> <para> ! To build PHP3 as an fhttpd module, answer "yes" to "Build as an fhttpd ! module?" (the <option><link linkend="with-fhttpd"> --with-fhttpd</link>=<replaceable>DIR</replaceable></option> ! option to configure) and specify the fhttpd source base directory. ! The default directory is <filename ! class=directory>/usr/local/src/fhttpd</filename>. If you are running ! fhttpd, building PHP as a module will give better performance, ! more control and remote execution capability. <sect2 id="install-cgi"> <title>CGI version</title> --- 123,136 ---- <title>fhttpd module</title> <para> ! To build PHP3 as an fhttpd module, answer "yes" to "Build as an ! fhttpd module?" (the <option><link linkend="with-fhttpd"> --with-fhttpd</link>=<replaceable>DIR</replaceable></option> ! option to configure) and specify the fhttpd source base ! directory. The default directory is <filename ! class=directory>/usr/local/src/fhttpd</filename>. If you are ! running fhttpd, building PHP as a module will give better ! performance, more control and remote execution capability. <sect2 id="install-cgi"> <title>CGI version</title> *************** *** 135,142 **** generally go for that solution for performance reasons. However, the CGI version enables Apache users to run different PHP3-enabled pages under different user-ids. Please make sure ! you read through the <link linkend="config-security">Security chapter</link> ! if you are going to run PHP as a CGI. <sect2> <title>Database Support Options</title> --- 141,148 ---- generally go for that solution for performance reasons. However, the CGI version enables Apache users to run different PHP3-enabled pages under different user-ids. Please make sure ! you read through the <link linkend="config-security">Security ! chapter</link> if you are going to run PHP as a CGI. <sect2> <title>Database Support Options</title> *************** *** 145,151 **** PHP3 has native support for a number of databases (as well as ODBC): ! </para> <sect3 id="with-adabas"> <title>Adabas D</title> <synopsis> --- 151,157 ---- PHP3 has native support for a number of databases (as well as ODBC): ! <sect3 id="with-adabas"> <title>Adabas D</title> <synopsis> *************** *** 195,201 **** databases, and vice-versa. <simpara> See also <link linkend="ini.sect.msql">mSQL Configuration</link> ! Directives in the <link linkend="php3.ini">configuration file</link>. <simpara> <ulink url="http://www.hughes.com.au">mSQL home page</ulink> </sect3> --- 201,208 ---- databases, and vice-versa. <simpara> See also <link linkend="ini.sect.msql">mSQL Configuration</link> ! Directives in the <link linkend="php3.ini">configuration ! file</link>. <simpara> <ulink url="http://www.hughes.com.au">mSQL home page</ulink> </sect3> *************** *** 206,218 **** <option>--with-mysql<replaceable>=DIR</replaceable></option> </synopsis> <simpara> ! Enables MySQL support. The parameter to this ! option is the MySQL install directory and defaults to <filename ! class=directory>/usr/local</filename>. This is the default installation directory of the MySQL distribution. <simpara> ! See also <link linkend="ini.sect.mysql">MySQL Configuration</link> ! Directives in the <link linkend="php3.ini">configuration file</link>. <simpara> <ulink url="http://www.tcx.se">MySQL home page</ulink> </sect3> --- 213,226 ---- <option>--with-mysql<replaceable>=DIR</replaceable></option> </synopsis> <simpara> ! Enables MySQL support. The parameter to this option is the ! MySQL install directory and defaults to <filename ! class=directory>/usr/local</filename>. This is the default installation directory of the MySQL distribution. <simpara> ! See also <link linkend="ini.sect.mysql">MySQL ! Configuration</link> Directives in the <link ! linkend="php3.ini">configuration file</link>. <simpara> <ulink url="http://www.tcx.se">MySQL home page</ulink> </sect3> *************** *** 224,236 **** </synopsis> <simpara> Includes iODBC support. This feature was first developed for ! iODBC Driver Manager, a freely redistributable ODBC driver manager ! which runs under many flavors of UNIX. The parameter to this option is ! the iODBC installation directory and defaults to <filename ! class=directory>/usr/local</filename>. <simpara> ! <ulink url="http://users.ids.net/~bjepson/freeODBC/">FreeODBC home ! page</ulink> </sect3> <sect3 id="with-openlink"> --- 232,244 ---- </synopsis> <simpara> Includes iODBC support. This feature was first developed for ! iODBC Driver Manager, a freely redistributable ODBC driver ! manager which runs under many flavors of UNIX. The parameter to ! this option is the iODBC installation directory and defaults to ! <filename class=directory>/usr/local</filename>. <simpara> ! <ulink url="http://users.ids.net/~bjepson/freeODBC/">FreeODBC ! home page</ulink> </sect3> <sect3 id="with-openlink"> *************** *** 244,250 **** <filename class=directory>/usr/local/openlink</filename>. <simpara> <ulink url="http://www.openlinksw.com/">OpenLink Software's home ! page</ulink> </sect3> <sect3 id="with-oracle"> --- 252,258 ---- <filename class=directory>/usr/local/openlink</filename>. <simpara> <ulink url="http://www.openlinksw.com/">OpenLink Software's home ! page</ulink> </sect3> <sect3 id="with-oracle"> *************** *** 268,281 **** <option>--with-pgsql<replaceable>=DIR</replaceable></option> </synopsis> <simpara> ! Includes PostgreSQL support. The parameter is the PostgreSQL base ! install directory and defaults to <filename class=directory>/usr/local/pgsql</filename>. <simpara> ! See also <link linkend="ini.sect.pgsql">Postgres Configuration</link> ! Directives in the <link linkend="php3.ini">configuration file</link>. <simpara> ! <ulink url="http://www.postgreSQL.org/">PostgreSQL home page</ulink> </sect3> <sect3 id="with-solid"> --- 276,291 ---- <option>--with-pgsql<replaceable>=DIR</replaceable></option> </synopsis> <simpara> ! Includes PostgreSQL support. The parameter is the PostgreSQL ! base install directory and defaults to <filename class=directory>/usr/local/pgsql</filename>. <simpara> ! See also <link linkend="ini.sect.pgsql">Postgres ! Configuration</link> Directives in the <link ! linkend="php3.ini">configuration file</link>. <simpara> ! <ulink url="http://www.postgreSQL.org/">PostgreSQL home ! page</ulink> </sect3> <sect3 id="with-solid"> *************** *** 301,308 **** directory and defaults to <filename class=directory>/home/sybase</filename>. <simpara> ! See also <link linkend="ini.sect.sybase">Sybase Configuration</link> ! Directives in the <link linkend="php3.ini">configuration file</link>. <simpara> <ulink url="http://www.sybase.com">Sybase home page</ulink> </sect3> --- 311,319 ---- directory and defaults to <filename class=directory>/home/sybase</filename>. <simpara> ! See also <link linkend="ini.sect.sybase">Sybase ! Configuration</link> Directives in the <link ! linkend="php3.ini">configuration file</link>. <simpara> <ulink url="http://www.sybase.com">Sybase home page</ulink> </sect3> *************** *** 317,324 **** install directory and defaults to <filename class=directory>/home/sybase</filename>. <simpara> ! See also <link linkend="ini.sect.sybct">Sybase-CT Configuration</link> ! Directives in the <link linkend="php3.ini">configuration file</link>. </sect3> <sect3 id="with-velocis"> --- 328,336 ---- install directory and defaults to <filename class=directory>/home/sybase</filename>. <simpara> ! See also <link linkend="ini.sect.sybct">Sybase-CT ! Configuration</link> Directives in the <link ! linkend="php3.ini">configuration file</link>. </sect3> <sect3 id="with-velocis"> *************** *** 340,360 **** <option>--with-custom-odbc<replaceable>=DIR</replaceable></option> </synopsis> <simpara> ! Includes support for an arbitrary custom ODBC library. The parameter ! is the base directory and defaults to ! <filename class=directory>/usr/local</filename>. <simpara> This option implies that you have defined CUSTOM_ODBC_LIBS when ! you run the configure script. You also must have a valid odbc.h header ! somewhere in your include path. If you don't have one, create it and ! include your specific header from there. Your header may also require ! some extra definitions, particularly when it is multiplatform. Define ! them in CFLAGS. ! <simpara> ! For example, you can use Sybase SQL Anywhere on QNX as following: ! <literal> ! CFLAGS=-DODBC_QNX LDFLAGS=-lunix CUSTOM_ODBC_LIBS="-ldblib -lodbc" ./configure --with-custom-odbc=/usr/lib/sqlany50 ! </literal> </sect3> <sect3 id="disable-unified-odbc"> --- 352,374 ---- <option>--with-custom-odbc<replaceable>=DIR</replaceable></option> </synopsis> <simpara> ! Includes support for an arbitrary custom ODBC library. The ! parameter is the base directory and defaults to <filename ! class=directory>/usr/local</filename>. <simpara> This option implies that you have defined CUSTOM_ODBC_LIBS when ! you run the configure script. You also must have a valid odbc.h ! header somewhere in your include path. If you don't have one, ! create it and include your specific header from there. Your ! header may also require some extra definitions, particularly ! when it is multiplatform. Define them in CFLAGS. ! <simpara> ! For example, you can use Sybase SQL Anywhere on QNX as ! following: ! <literal> ! CFLAGS=-DODBC_QNX LDFLAGS=-lunix CUSTOM_ODBC_LIBS="-ldblib ! -lodbc" ./configure --with-custom-odbc=/usr/lib/sqlany50 ! </literal> </sect3> <sect3 id="disable-unified-odbc"> *************** *** 365,383 **** <simpara> Disables the Unified ODBC module, which is a common interface to all the databases with ODBC-based interfaces, such as Solid and ! Adabas D. It also works for normal ODBC libraries. Has been tested with ! iODBC, Solid, Adabas D and Sybase SQL Anywhere. Requires that one ! (and only one) of these modules or the Velocis module is enabled, or a ! custom ODBC library specified. This option is only applicable ! if one of the following options is used: ! <link linkend="with-iodbc">--with-iodbc</link>, ! <link linkend="with-solid">--with-solid</link>, ! <link linkend="with-adabas">--with-adabas</link>, ! <link linkend="with-velocis">--with-velocis</link>, or ! <link linkend="with-adabas">--with-custom-odbc</link>, ! <simpara> ! See also <link linkend="ini.sect.uodbc">Unified ODBC Configuration</link> ! Directives in the <link linkend="php3.ini">configuration file</link>. </sect3> <sect3 id="with-ldap"> --- 379,399 ---- <simpara> Disables the Unified ODBC module, which is a common interface to all the databases with ODBC-based interfaces, such as Solid and ! Adabas D. It also works for normal ODBC libraries. Has been ! tested with iODBC, Solid, Adabas D and Sybase SQL ! Anywhere. Requires that one (and only one) of these modules or ! the Velocis module is enabled, or a custom ODBC library ! specified. This option is only applicable if one of the ! following options is used: <link ! linkend="with-iodbc">--with-iodbc</link>, <link ! linkend="with-solid">--with-solid</link>, <link ! linkend="with-adabas">--with-adabas</link>, <link ! linkend="with-velocis">--with-velocis</link>, or <link ! linkend="with-adabas">--with-custom-odbc</link>, ! <simpara> ! See also <link linkend="ini.sect.uodbc">Unified ODBC ! Configuration</link> Directives in the <link ! linkend="php3.ini">configuration file</link>. </sect3> <sect3 id="with-ldap"> *************** *** 391,399 **** directory, defaults to <filename class=directory>/usr/local/ldap</filename>. <simpara> ! More information about LDAP can be found in ! <ulink url="ftp://ftp.isi.edu/in-notes/rfc1777.txt">RFC1777</ulink> ! and <ulink url="ftp://ftp.isi.edu/in-notes/rfc1778.txt">RFC1778</ulink>. </sect3> </sect2> --- 407,416 ---- directory, defaults to <filename class=directory>/usr/local/ldap</filename>. <simpara> ! More information about LDAP can be found in <ulink ! url="ftp://ftp.isi.edu/in-notes/rfc1777.txt">RFC1777</ulink> and ! <ulink ! url="ftp://ftp.isi.edu/in-notes/rfc1778.txt">RFC1778</ulink>. </sect3> </sect2> *************** *** 408,415 **** </synopsis> <simpara> Include support for Sys V semaphores (supported by most Unix ! derivates). See the <link linkend="ref.sem">Semaphore and ! Shared Memory documentation</link> for more information. </simpara> </sect3> --- 425,432 ---- </synopsis> <simpara> Include support for Sys V semaphores (supported by most Unix ! derivates). See the <link linkend="ref.sem">Semaphore and Shared ! Memory documentation</link> for more information. </simpara> </sect3> *************** *** 419,427 **** <option>--enable-sysvshm</option> </synopsis> <simpara> ! Include support for Sys V shared memory (supported by most Unix ! derivates). See the <link linkend="ref.sem">Semaphore and ! Shared Memory documentation</link> for more information. </simpara> </sect3> --- 436,444 ---- <option>--enable-sysvshm</option> </synopsis> <simpara> ! Include support for Sys V shared memory (supported by most Unix ! derivates). See the <link linkend="ref.sem">Semaphore and ! Shared Memory documentation</link> for more information. </simpara> </sect3> *************** *** 456,464 **** <simpara> Uses the system's regular expression library rather than the bundled one. If you are building PHP3 as a server module, you ! must use the same library when building PHP3 as when linking the server. ! Enable this if the system's library provides special features you need. ! It is recommended that you use the bundled library if possible. </sect3> <sect3 id="with-config-file-path"> --- 473,482 ---- <simpara> Uses the system's regular expression library rather than the bundled one. If you are building PHP3 as a server module, you ! must use the same library when building PHP3 as when linking the ! server. Enable this if the system's library provides special ! features you need. It is recommended that you use the bundled ! library if possible. </sect3> <sect3 id="with-config-file-path"> *************** *** 481,488 **** Defaults to <filename class=directory>/usr/local/bin</filename>. This option only sets the default, it may be changed with the <link linkend="ini.safe-mode-exec-dir">safe_mode_exec_dir</link> ! directive in the <link linkend="php3.ini">configuration file</link> ! later. </sect3> <sect3 id="disable-debug"> --- 499,506 ---- Defaults to <filename class=directory>/usr/local/bin</filename>. This option only sets the default, it may be changed with the <link linkend="ini.safe-mode-exec-dir">safe_mode_exec_dir</link> ! directive in the <link linkend="php3.ini">configuration ! file</link> later. </sect3> <sect3 id="disable-debug"> *************** *** 503,515 **** <option>--enable-safe-mode</option> </synopsis> <simpara> ! Enables "safe mode" by default. This imposes several restrictions ! on what PHP can do, such as opening only files within the document ! root. Read the <link linkend="config-security">Security chapter</link> ! for more more information. CGI users should always enable secure mode. ! This option only sets the default, it may be enabled or disabled with ! the <link linkend="ini.safe-mode">safe_mode</link> directive in the ! <link linkend="php3.ini">configuration file</link> later. </sect3> <sect3 id="enable-track-vars"> --- 521,534 ---- <option>--enable-safe-mode</option> </synopsis> <simpara> ! Enables "safe mode" by default. This imposes several ! restrictions on what PHP can do, such as opening only files ! within the document root. Read the <link ! linkend="config-security">Security chapter</link> for more more ! information. CGI users should always enable secure mode. This ! option only sets the default, it may be enabled or disabled with ! the <link linkend="ini.safe-mode">safe_mode</link> directive in ! the <link linkend="php3.ini">configuration file</link> later. </sect3> <sect3 id="enable-track-vars"> *************** *** 520,528 **** <simpara> Makes PHP3 keep track of where GET/POST/cookie variables come from in the arrays HTTP_GET_VARS, HTTP_POST_VARS and ! HTTP_COOKIE_VARS. ! This option only sets the default, it may be enabled or disabled with ! the <link linkend="ini.track-vars">track_vars</link> directive in the <link linkend="php3.ini">configuration file</link> later. </sect3> --- 539,547 ---- <simpara> Makes PHP3 keep track of where GET/POST/cookie variables come from in the arrays HTTP_GET_VARS, HTTP_POST_VARS and ! HTTP_COOKIE_VARS. This option only sets the default, it may be ! enabled or disabled with the <link ! linkend="ini.track-vars">track_vars</link> directive in the <link linkend="php3.ini">configuration file</link> later. </sect3> *************** *** 532,544 **** <option>--enable-magic-quotes</option> </synopsis> <simpara> ! Enable magic quotes by default. ! This option only sets the default, it may be enabled or disabled with ! the <link linkend="ini.magic-quotes-runtime">magic_quotes_runtime</link> ! directive in the <link linkend="php3.ini">configuration file</link> ! later. See also the <link linkend="ini.magic-quotes-gpc"> ! magic_quotes_gpc</link> and the <link ! linkend="ini.magic-quotes-sybase">magic_quotes_sybase</link> directives. </sect3> <sect3 id="enable-debugger"> --- 551,565 ---- <option>--enable-magic-quotes</option> </synopsis> <simpara> ! Enable magic quotes by default. This option only sets the ! default, it may be enabled or disabled with the <link ! linkend="ini.magic-quotes-runtime">magic_quotes_runtime</link> ! directive in the <link linkend="php3.ini">configuration ! file</link> later. See also the <link ! linkend="ini.magic-quotes-gpc"> magic_quotes_gpc</link> and the ! <link ! linkend="ini.magic-quotes-sybase">magic_quotes_sybase</link> ! directives. </sect3> <sect3 id="enable-debugger"> *************** *** 549,556 **** <simpara> Enables the internal PHP3 debugger support. This feature is still in an experimental state. See also the <link ! linkend="ini.sect.debugger">Debugger Configuration</link> directives ! in the <link linkend="php3.ini">configuration file</link>. </sect3> <sect3 id="enable-discard-path"> --- 570,578 ---- <simpara> Enables the internal PHP3 debugger support. This feature is still in an experimental state. See also the <link ! linkend="ini.sect.debugger">Debugger Configuration</link> ! directives in the <link linkend="php3.ini">configuration ! file</link>. </sect3> <sect3 id="enable-discard-path"> *************** *** 561,569 **** <simpara> If this is enabled, the PHP CGI binary can safely be placed outside of the web tree and people will not be able to ! circumvent .htaccess security. ! Read the <link linkend="config-security-cgi-shell">section in ! the security chapter</link> about this option. </sect3> <sect3 id="enable-bcmath"> --- 583,591 ---- <simpara> If this is enabled, the PHP CGI binary can safely be placed outside of the web tree and people will not be able to ! circumvent .htaccess security. Read the <link ! linkend="config-security-cgi-shell">section in the security ! chapter</link> about this option. </sect3> <sect3 id="enable-bcmath"> *************** *** 573,580 **** </synopsis> <simpara> Enables <command>bc</command> style arbitrary precision math ! functions. See also the <link linkend="ini.sect.bcmath">bcmath.scale ! </link> option in the <link linkend="php3.ini">configuration file</link>. </sect3> <sect3 id="enable-force-cgi-redirect"> --- 595,603 ---- </synopsis> <simpara> Enables <command>bc</command> style arbitrary precision math ! functions. See also the <link ! linkend="ini.sect.bcmath">bcmath.scale </link> option in the ! <link linkend="php3.ini">configuration file</link>. </sect3> <sect3 id="enable-force-cgi-redirect"> *************** *** 619,628 **** Disables the short form <literal>&lt;? ?&gt;</literal> PHP3 tags. You must disable the short form if you want to use PHP3 with <acronym>XML</acronym>. With short tags disabled, the only ! PHP3 code tag is <literal>&lt;?php ?&gt;</literal>. ! This option only sets the default, it may be enabled or disabled with ! the <link linkend="ini.short-open-tag">short_open_tag</link> directive ! in the <link linkend="php3.ini">configuration file</link> later. </sect3> <sect3 id="enable-url-includes"> --- 642,652 ---- Disables the short form <literal>&lt;? ?&gt;</literal> PHP3 tags. You must disable the short form if you want to use PHP3 with <acronym>XML</acronym>. With short tags disabled, the only ! PHP3 code tag is <literal>&lt;?php ?&gt;</literal>. This option ! only sets the default, it may be enabled or disabled with the ! <link linkend="ini.short-open-tag">short_open_tag</link> ! directive in the <link linkend="php3.ini">configuration ! file</link> later. </sect3> <sect3 id="enable-url-includes"> *************** *** 631,640 **** <option>--enable-url-includes</option> </synopsis> <simpara> ! Makes it possible to run code on other HTTP or FTP servers directly ! from PHP3 with <link linkend="function.include">include()</link>. ! See also the <link linkend="ini.include-path">include_path</link> option ! in the <link linkend="php3.ini">configuration file</link>. </sect3> <sect3 id="disable-syntax-hl"> --- 655,665 ---- <option>--enable-url-includes</option> </synopsis> <simpara> ! Makes it possible to run code on other HTTP or FTP servers ! directly from PHP3 with <link ! linkend="function.include">include()</link>. See also the <link ! linkend="ini.include-path">include_path</link> option in the ! <link linkend="php3.ini">configuration file</link>. </sect3> <sect3 id="disable-syntax-hl"> *************** *** 649,659 **** <sect3> <title>CPPFLAGS and LDFLAGS</title> <para> ! To make the PHP3 installation look for header or library files in ! different directories, modify the <envar>CPPFLAGS</envar> and <envar>LDFLAGS</envar> environment variables, respectively. If you are using a sensible shell, you should be able to do ! <command>LDFLAGS=-L/my/lib/dir CPPFLAGS=-I/my/include/dir ./configure </command> </sect3> --- 674,685 ---- <sect3> <title>CPPFLAGS and LDFLAGS</title> <para> ! To make the PHP3 installation look for header or library files ! in different directories, modify the <envar>CPPFLAGS</envar> and <envar>LDFLAGS</envar> environment variables, respectively. If you are using a sensible shell, you should be able to do ! <command> ! LDFLAGS=-L/my/lib/dir CPPFLAGS=-I/my/include/dir ./configure </command> </sect3> *************** *** 689,702 **** <sect2> <title>Benchmarking</title> <simpara> ! If you have built PHP3 as a CGI program, you may benchmark your build ! by typing <command>make bench</command>. Note that if safe mode is on ! by default, the benchmark may not be able to finish if it takes longer ! then the 30 seconds allowed. This is because the ! <function>set_time_limit</function> can not be used in safe mode. Use ! the <link linkend="ini.max-execution-time">max_execution_time</link> ! to control this time for you own scripts. <command>make bench</command> ! ignores the <link linkend="php3.ini">configuration file</link>. </sect2> </sect1> --- 715,730 ---- <sect2> <title>Benchmarking</title> <simpara> ! If you have built PHP3 as a CGI program, you may benchmark your ! build by typing <command>make bench</command>. Note that if safe ! mode is on by default, the benchmark may not be able to finish if ! it takes longer then the 30 seconds allowed. This is because the ! <function>set_time_limit</function> can not be used in safe ! mode. Use the <link ! linkend="ini.max-execution-time">max_execution_time</link> to ! control this time for you own scripts. <command>make ! bench</command> ignores the <link ! linkend="php3.ini">configuration file</link>. </sect2> </sect1> *************** *** 713,724 **** <para> This guide provides installation support for: <simplelist> ! <member>Personal Web Server (Newest version recommended)</member> ! <member>Internet Information Server 3 or 4</member> ! <member>Apache 1.3.x</member> ! <member>Omni HTTPd 2.0b1</member> </simplelist> ! </para> <sect2> <title>Configuration Changes for PHP3</title> --- 741,759 ---- <para> This guide provides installation support for: <simplelist> ! <member> ! Personal Web Server (Newest version recommended) ! </member> ! <member> ! Internet Information Server 3 or 4 ! </member> ! <member> ! Apache 1.3.x ! </member> ! <member>Omni HTTPd 2.0b1 ! </member> </simplelist> ! <sect2> <title>Configuration Changes for PHP3</title> *************** *** 782,792 **** <listitem> <simpara> Choose which modules you would like to load when PHP ! starts. You can uncomment the: 'extension=php3_*.dll' lines to load these modules. Some modules require you to have additional libraries installed on your system for the module to work correctly. The PHP <ulink ! url="&url.php3.faq">FAQ</ulink> has more information on where to get supporting libraries. You can also load a module dynamically in your script using: <command>dl("php_*.dll");</command> --- 817,827 ---- <listitem> <simpara> Choose which modules you would like to load when PHP ! starts. You can uncomment the: 'extension=php3_*.dll' lines to load these modules. Some modules require you to have additional libraries installed on your system for the module to work correctly. The PHP <ulink ! url="&url.php3.faq">FAQ</ulink> has more information on where to get supporting libraries. You can also load a module dynamically in your script using: <command>dl("php_*.dll");</command> *************** *** 799,805 **** und 'c:\winnt\system32\inetsrv\browscap.ini' on NT Server. Additional information on using the browscap functionality in PHP can be found at this <ulink ! url="&url.browscap;">mirror</ulink>, select the "source" button to see it in action. </simpara> </listitem> --- 834,840 ---- und 'c:\winnt\system32\inetsrv\browscap.ini' on NT Server. Additional information on using the browscap functionality in PHP can be found at this <ulink ! url="&url.browscap;">mirror</ulink>, select the "source" button to see it in action. </simpara> </listitem> *************** *** 1056,1062 **** <simpara> To use the source code highlighting feature, simply create a PHP script file and stick this code in: <literal><?php show_source ! ("original_php_script.php3"); ?></literal>. Substitute <literal>original_php_script.php3</literal> with the name of the file you wish to show the source of. (this is only one way of doing it). <emphasis>Note:</emphasis> On Win-Apache all back --- 1091,1097 ---- <simpara> To use the source code highlighting feature, simply create a PHP script file and stick this code in: <literal><?php show_source ! ("original_php_script.php3"); ?></literal>. Substitute <literal>original_php_script.php3</literal> with the name of the file you wish to show the source of. (this is only one way of doing it). <emphasis>Note:</emphasis> On Win-Apache all back *************** *** 1075,1091 **** <para> <simplelist> ! <member>Step 1: Install Omni server</member> ! <member>Step 2: Right click on the blue OmniHTTPd icon in the ! system tray and select <literal>Properties</literal></member> ! <member>Step 3: Click on <literal>Web Server Global ! Settings</literal></member> ! <member>Step 4: On the 'External' tab, enter: <literal>virtual = ! .php3 | actual = c:\path-to-php-dir\php.exe</literal></member> ! <member>Step 5: On the <literal>Mime</literal> tab, enter: ! <literal>virtual = wwwserver/stdcgi | actual = ! .php3</literal></member> ! <member>Step 6: Click <literal>OK</literal></member> </simplelist> <simpara> --- 1110,1137 ---- <para> <simplelist> ! <member> ! Step 1: Install Omni server ! </member> ! <member> ! Step 2: Right click on the blue OmniHTTPd icon in the system ! tray and select <literal>Properties</literal> ! </member> ! <member> ! Step 3: Click on <literal>Web Server Global ! Settings</literal> ! </member> ! <member> ! Step 4: On the 'External' tab, enter: <literal>virtual = .php3 ! | actual = c:\path-to-php-dir\php.exe</literal> ! </member> ! <member> ! Step 5: On the <literal>Mime</literal> tab, enter: ! <literal>virtual = wwwserver/stdcgi | actual = .php3</literal> ! </member> ! <member> ! Step 6: Click <literal>OK</literal> ! </member> </simplelist> <simpara> -- PHP Development Mailing List http://www.php.net/ To unsubscribe send an empty message to php-dev-unsubscribe@lists.php.net For help: php-dev-help@lists.php.net