cvs: phpdoc /en/chapters install.xml

From: Date: Fri, 28 Dec 2001 21:57:05 +0000
Subject: cvs: phpdoc /en/chapters install.xml
Groups: php.doc 
Request: Send a blank email to phpdoc+get-969340442@lists.php.net to get a copy of this message
mk Fri Dec 28 16:57:05 2001 EDT Modified files: /phpdoc/en/chapters install.xml Log: Total update of the install.configure.php part with all configure options of PHP 4.1.0

Index: phpdoc/en/chapters/install.xml diff -u phpdoc/en/chapters/install.xml:1.96 phpdoc/en/chapters/install.xml:1.97 --- phpdoc/en/chapters/install.xml:1.96 Wed Dec 12 15:46:31 2001 +++ phpdoc/en/chapters/install.xml Fri Dec 28 16:57:05 2001 @@ -1,5 +1,5 @@ <?xml version="1.0" encoding="iso-8859-1"?> -<!-- $Revision: 1.96 $ --> +<!-- $Revision: 1.97 $ --> <chapter id="installation"> <title>Installation</title> @@ -625,17 +625,21 @@ </note> <para> - The following is a complete list of options supported by the PHP 3 - and PHP 4 <filename>configure</filename> scripts, used when + The following is a complete list of options supported by PHP 4 + <filename>configure</filename> scripts (as of 4.1.0), used when compiling in Unix-like environments. Some are available in PHP 3, - some in PHP 4, and some in both, as noted. There are many options + some in PHP 4, and some in both. This is not noted yet. + +<!-- There are many options the names of which have changed between PHP 3 and PHP 4, but which accomplish the same things. These entries are cross-referenced to each other, so if you have a problem getting your PHP 3-era configuration options to work, check here to see whether the names have changed. +--> </para> +<!-- <itemizedlist> <listitem> <para> @@ -683,2431 +687,1660 @@ </para> </listitem> </itemizedlist> +--> - <sect2 id="install.configure.databases"> - <title>Database</title> - <variablelist> - - <varlistentry id="install.configure.with-adabas"> - <term> - <parameter>--with-adabas[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Include Adabas D support. DIR is the Adabas base - install directory, defaults to /usr/local. - </para> - <para> - <ulink url="&url.adabas;">Adabas home page</ulink> - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-dba"> - <term> - <parameter>--enable-dba=shared</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Build DBA as a shared module - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-dbx"> - <term> - <parameter>--enable-dbx</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Include DBX support - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-dbase"> - <term> - <parameter>--enable-dbase</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available; use <link - linkend="install.configure.with-dbase">--with-dbase</link> - instead. - </para> - <para> - PHP 4: Enable the bundled dbase library. No external libraries - are required. - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.with-dbase"> - <term> - <parameter>--with-dbase</parameter> - </term> - <listitem> - <para> - PHP 3: Include the bundled dbase library. No external - libraries are required. - </para> - <para> - PHP 4: Option not available; use <link - linkend="install.configure.enable-dbase">--enable-dbase</link> - instead. - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.with-db2"> - <term> - <parameter>--with-db2[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Include Berkeley DB2 support - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.with-db3"> - <term> - <parameter>--with-db3[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Include Berkeley DB3 support - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.with-dbm"> - <term> - <parameter>--with-dbm[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Include DBM support - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.with-dbmaker"> - <term> - <parameter>--with-dbmaker[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Include DBMaker support. DIR is the DBMaker base install - directory, defaults to where the latest version of DBMaker is installed - (such as /home/dbmaker/3.6). - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.with-empress"> - <term> - <parameter>--with-empress[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Include Empress support. DIR is the Empress base install - directory, defaults to $EMPRESSPATH - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-filepro"> - <term> - <parameter>--enable-filepro</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available; use <link - linkend="install.configure.with-filepro">--with-filepro</link> - instead. - </para> - <para> - PHP 4: Enable the bundled read-only filePro support. No - external libraries are required. - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.with-filepro"> - <term> - <parameter>--with-filepro</parameter> - </term> - <listitem> - <para> - PHP 3: Include the bundled read-only filePro support. No - external libraries are required. - </para> - <para> - PHP 4: Option not available; use <link - linkend="install.configure.enable-filepro">--enable-filepro</link> - instead. - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.with-fbsql"> - <term> - <parameter>--with-fbsql[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available. - </para> - <para> - PHP 4: Include FrontBase SQL support. DIR is the FrontBase base - install directory, defaults to usual Frontbase install dir. - Usual install dirs depends on your OS : - Solaris: <literal>/opt/FrontBase</literal>, - WinNT: <literal>\usr\FrontBase</literal>, - Linux: <literal>/usr/frontbase</literal>, - Mac OSX: <literal>/Library/FrontBase</literal>. - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.with-gdbm"> - <term> - <parameter>--with-gdbm[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Include GDBM support - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.with-hyperwave"> - <term> - <parameter>--with-hyperwave</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Include Hyperwave support - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.with-ibm-db2"> - <term> - <parameter>--with-ibm-db2[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Include IBM DB2 support. DIR is the DB2 base - install directory, defaults to - <filename>/home/db2inst1/sqllib</filename>. - </para> - <para> - <ulink url="&url.ibmdb2;">IBM DB2 home page</ulink> - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.with-informix"> - <term> - <parameter>--with-informix[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Include Informix support. DIR is the Informix base install - directory, defaults to nothing. - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.with-ingres"> - <term> - <parameter>--with-ingres[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Include Ingres II support. DIR is the Ingres base directory - (default /II/ingres) - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.with-interbase"> - <term> - <parameter>--with-interbase[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Include InterBase support. DIR is the InterBase base - install directory, which defaults to <filename>/usr/interbase</filename>. - </para> - <simpara> - <link linkend="ref.ibase">Interbase functions</link> - </simpara> - <simpara> - <ulink url="&url.ibase;">Interbase home page</ulink> - </simpara> - </listitem> - </varlistentry> - <varlistentry id="install.configure.with-ldap"> - <term> - <parameter>--with-ldap[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Include LDAP support. DIR is the LDAP base install - directory. Defaults to <filename>/usr</filename> and - <filename>/usr/local</filename> + <varlistentry id="install.configure.enable-maintainer-mode"> + <term> + <parameter>--enable-maintainer-mode</parameter> + </term> + <listitem> + <para> + Enable make rules and dependencies not useful (and sometimes confusing) + to the casual installer. </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-aolserver=DIR"> + <term> + <parameter>--with-aolserver=DIR</parameter> + </term> + <listitem> <para> - PHP 4: Include LDAP support. DIR is the LDAP base install directory. + Specify path to the installed AOLserver. </para> - <simpara> - This provides <acronym>LDAP</acronym> (Lightweight Directory Access - Protocol support). The parameter is the LDAP base install - directory, defaults to <filename - class="directory">/usr/local/ldap</filename>. - </simpara> - <simpara> - More information about LDAP can be found in <ulink - url="&url.rfc;rfc1777.html">RFC1777</ulink> and - <ulink - url="&url.rfc;rfc1778.html">RFC1778</ulink>. - </simpara> - </listitem> - </varlistentry> - <varlistentry id="install.configure.with-msql"> - <term> - <parameter>--with-msql[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Enables mSQL support. The parameter to this - option is the mSQL install directory and defaults to <filename - class="directory">/usr/local/Hughes</filename>. This is the - default directory of the mSQL 2.0 distribution. - <command>configure</command> automatically detects which mSQL - version you are running and PHP supports both 1.0 and 2.0, but - if you compile PHP with mSQL 1.0, you can only access mSQL 1.0 - databases, and vice-versa. - </para> - <simpara> - See also <link linkend="ini.sect.msql">mSQL - Configuration</link> Directives in the <link - linkend="configuration.file">configuration file</link>. - </simpara> - <simpara> - <ulink url="&url.msql;">mSQL home page</ulink> - </simpara> - </listitem> - </varlistentry> - <varlistentry id="install.configure.with-mysql"> - <term> - <parameter>--with-mysql[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Include MySQL support. DIR is the MySQL base install directory, - defaults to searching through a number of common places for the MySQL - files. - </para> - <para> - PHP 4: Include MySQL support. DIR is the MySQL base directory. If - unspecified, the bundled MySQL library will be used. This - option is turned on by default. - </para> - <para> - See also <link linkend="ini.sect.mysql">MySQL - Configuration</link> Directives in the <link - linkend="configuration.file">configuration file</link>. - </para> - <para> - <ulink url="&url.mysql;">MySQL home page</ulink> - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.with-ndbm"> - <term> - <parameter>--with-ndbm[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Include NDBM support - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.with-ovrimos"> - <term> - <parameter>--with-ovrimos</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Include Ovrimos support. - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.with-oci8"> - <term> - <parameter>--with-oci8[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Include Oracle-oci8 support. Default DIR is ORACLE_HOME. - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.with-oracle"> - <term> - <parameter>--with-oracle[=DIR]</parameter> - </term> - <listitem> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-apxs[=FILE]"> + <term> + <parameter>--with-apxs[=FILE]</parameter> + </term> + <listitem> <para> - PHP 3: Include Oracle database support. DIR is Oracle's home directory, - defaults to $ORACLE_HOME. + Build shared Apache module. FILE is the optional pathname to the Apache + apxs tool; defaults to apxs. </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-apache[=DIR]"> + <term> + <parameter>--with-apache[=DIR]</parameter> + </term> + <listitem> <para> - PHP 4: Include Oracle-oci7 support. Default DIR is ORACLE_HOME. + Build Apache module. DIR is the top-level Apache build directory, defaults + to /usr/local/apache. </para> - <simpara> - Includes Oracle support. Has been tested and should be - working at least with Oracle versions 7.0 through 7.3. The - parameter is the <envar>ORACLE_HOME</envar> directory. You do - not have to specify this parameter if your Oracle environment - has been set up. - </simpara> - <simpara> - <ulink url="&url.oracle;">Oracle home page</ulink> - </simpara> </listitem> </varlistentry> - <varlistentry id="install.configure.with-pgsql"> + <varlistentry id="install.configure.with-mod_charset"> <term> - <parameter>--with-pgsql[=DIR]</parameter> + <parameter>--with-mod_charset</parameter> </term> <listitem> <para> - PHP 3: Include PostgresSQL support. DIR is the PostgresSQL base - install directory, which defaults to - <filename>/usr/local/pgsql</filename>. + Enable transfer tables for mod_charset (Rus Apache). </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-apxs2[=FILE]"> + <term> + <parameter>--with-apxs2[=FILE]</parameter> + </term> + <listitem> <para> - PHP 4: Include PostgreSQL support. DIR is the PostgreSQL base - install directory, which defaults to - <filename>/usr/local/pgsql</filename>. Set DIR to shared to - build as a dl, or shared,DIR to build as a dl and still specify - DIR. + Build shared Apache 2.0 module. FILE is the optional pathname to the Apache + apxs tool; defaults to apxs. </para> - <simpara> - See also <link linkend="ini.sect.pgsql">Postgres - Configuration</link> Directives in the <link - linkend="configuration.file">configuration file</link>. - </simpara> - <simpara> - <ulink url="&url.pgsql;">PostgreSQL home page</ulink> - </simpara> </listitem> </varlistentry> - <varlistentry id="install.configure.with-solid"> + <varlistentry id="install.configure.enable-force-cgi-redirect"> <term> - <parameter>--with-solid[=DIR]</parameter> + <parameter>--enable-force-cgi-redirect</parameter> </term> <listitem> <para> - PHP 3, PHP 4: Include Solid support. DIR is the Solid base install - directory, defaults to /usr/local/solid + Enable the security check for internal server redirects. You should use this + if you are running the CGI version with Apache. </para> - <simpara> - <ulink url="&url.solid;">Solid home page</ulink> - </simpara> </listitem> </varlistentry> - <varlistentry id="install.configure.with-sybase-ct"> + <varlistentry id="install.configure.enable-discard-path"> <term> - <parameter>--with-sybase-ct[=DIR]</parameter> + <parameter>--enable-discard-path</parameter> </term> <listitem> <para> - PHP 3, PHP 4: Include Sybase-CT support. DIR is the Sybase home - directory, defaults to /home/sybase. + If this is enabled, the PHP CGI binary can safely be placed outside of the web + tree and people will not be able to circumvent .htaccess security. </para> - <simpara> - See also <link linkend="ini.sect.sybct">Sybase-CT - Configuration</link> Directives in the <link - linkend="configuration.file">configuration - file</link>. - </simpara> </listitem> </varlistentry> - <varlistentry id="install.configure.with-sybase"> + <varlistentry id="install.configure.with-fhttpd[=DIR]"> <term> - <parameter>--with-sybase[=DIR]</parameter> + <parameter>--with-fhttpd[=DIR]</parameter> </term> <listitem> <para> - PHP 3, PHP 4: Include Sybase-DB support. DIR is the Sybase home - directory, which defaults to <filename>/home/sybase</filename>. + Build fhttpd module. DIR is the fhttpd sources directory, defaults to /usr/local/src/fhttpd. </para> - <simpara> - See also <link linkend="ini.sect.sybase">Sybase - Configuration</link> Directives in the <link - linkend="configuration.file">configuration file</link>. - </simpara> - <simpara> - <ulink url="&url.sybase;">Sybase home page</ulink> - </simpara> </listitem> </varlistentry> - <varlistentry id="install.configure.with-openlink"> + <varlistentry id="install.configure.with-fastcgi=SRCDIR"> <term> - <parameter>--with-openlink[=DIR]</parameter> + <parameter>--with-fastcgi=SRCDIR</parameter> </term> <listitem> <para> - PHP 3, PHP 4: Include OpenLink ODBC support. DIR is the OpenLink base - install directory, defaults to /usr/local/openlink. - As of PHP 4.0.6 this configure option is no longer valid. Please use - the <parameter>--with-iodbc</parameter> if you wish to use OpenLink - Software's ODBC system. + Build PHP as FastCGI application. </para> - <simpara> - <ulink url="&url.openlink;">OpenLink Software's home page</ulink> - </simpara> </listitem> </varlistentry> - <varlistentry id="install.configure.with-iodbc"> + <varlistentry id="install.configure.with-isapi=DIR"> <term> - <parameter>--with-iodbc[=DIR]</parameter> + <parameter>--with-isapi=DIR</parameter> </term> <listitem> <para> - PHP 3, PHP 4: Include iODBC support. DIR is the iODBC base install - directory, defaults to <filename>/usr/local</filename>. + Build PHP as an ISAPI module for use with Zeus. </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-nsapi=DIR"> + <term> + <parameter>--with-nsapi=DIR</parameter> + </term> + <listitem> <para> - This feature was first developed for iODBC Driver Manager, a - freely redistributable ODBC driver manager which runs under - many flavors of UNIX. + Specify path to the installed Netscape Server. </para> - <simpara> - <ulink url="&url.freeodbc;">FreeODBC home page</ulink> - or <ulink url="&url.iodbc;">iODBC home page</ulink> - </simpara> </listitem> </varlistentry> - <varlistentry id="install.configure.with-custom-odbc"> + <varlistentry id="install.configure.with-phttpd=DIR"> <term> - <parameter>--with-custom-odbc[=DIR]</parameter> + <parameter>--with-phttpd=DIR</parameter> </term> <listitem> <para> - PHP 3, PHP 4: Includes support for an arbitrary custom ODBC - library. The parameter is the base directory and defaults to - <filename class="directory">/usr/local</filename>. + Not information yet. </para> - <simpara> - This option implies that you have defined CUSTOM_ODBC_LIBS - when you run the configure script. You also must have a valid - odbc.h header somewhere in your include path. If you don't - have one, create it and include your specific header from - there. Your header may also require some extra definitions, - particularly when it is multiplatform. Define them in - CFLAGS. - </simpara> - <simpara> - For example, you can use Sybase SQL Anywhere on QNX as - following: - <literal> - CFLAGS=-DODBC_QNX LDFLAGS=-lunix CUSTOM_ODBC_LIBS="-ldblib - -lodbc" ./configure --with-custom-odbc=/usr/lib/sqlany50 - </literal> - </simpara> </listitem> </varlistentry> - <varlistentry id="install.configure.disable-unified-odbc"> + <varlistentry id="install.configure.with-pi3web=DIR"> <term> - <parameter>--disable-unified-odbc</parameter> + <parameter>--with-pi3web=DIR</parameter> </term> <listitem> <para> - PHP 3: Disable unified ODBC support. Only applicable if iODBC, Adabas, - Solid, Velocis or a custom ODBC interface is enabled. + Build PHP as a module for use with Pi3Web. </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-roxen=DIR"> + <term> + <parameter>--with-roxen=DIR</parameter> + </term> + <listitem> <para> - PHP 4: Option not available in PHP 4 + Build PHP as a Pike module. DIR is the base Roxen directory, normally + /usr/local/roxen/server. </para> - <simpara> - The Unified ODBC module, which is a common interface to all - the databases with ODBC-based interfaces, such as Solid, IBM - DB2 and Adabas D. It also works for normal ODBC libraries. - Has been tested with iODBC, Solid, Adabas D, IBM DB2 and - Sybase SQL Anywhere. Requires that one (and only one) of these - extensions or the Velocis extension is enabled, or a custom ODBC - library specified. This option is only applicable if one of - the following options is used: <link - linkend="install.configure.with-iodbc">--with-iodbc</link>, - <link - linkend="install.configure.with-solid">--with-solid</link>, - <link - linkend="install.configure.with-ibm-db2">--with-ibm-db2</link>, - <link - linkend="install.configure.with-adabas">--with-adabas</link>, - <link - linkend="install.configure.with-velocis">--with-velocis</link>, - or <link - linkend="install.configure.with-custom-odbc">--with-custom-odbc</link>. - </simpara> - <simpara> - See also <link linkend="ini.sect.uodbc">Unified ODBC - Configuration</link> Directives in the <link - linkend="configuration.file">configuration - file</link>. - </simpara> </listitem> </varlistentry> - <varlistentry id="install.configure.with-unixODBC"> + <varlistentry id="install.configure.enable-roxen-zts"> <term> - <parameter>--with-unixODBC[=DIR]</parameter> + <parameter>--enable-roxen-zts</parameter> </term> <listitem> <para> - PHP 3: Option not available in PHP 3 + Build the Roxen module using Zend Thread Safety. </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-servlet[=DIR]"> + <term> + <parameter>--with-servlet[=DIR]</parameter> + </term> + <listitem> <para> - PHP 4: Include unixODBC support. DIR is the unixODBC base install - directory, defaults to /usr/local. + Include servlet support. DIR is the base install directory for the JSDK. + This SAPI prereqs the java extension must be built as a shared dl. </para> </listitem> </varlistentry> - <varlistentry id="install.configure.with-velocis"> + <varlistentry id="install.configure.with-thttpd=SRCDIR"> <term> - <parameter>--with-velocis[=DIR]</parameter> + <parameter>--with-thttpd=SRCDIR</parameter> </term> <listitem> <para> - PHP 3, PHP 4: Include Velocis support. DIR is the Velocis base install - directory, defaults to /usr/local/velocis. + Build PHP as thttpd module. </para> - <simpara> - <ulink url="&url.velocis;">Velocis home page</ulink> - </simpara> </listitem> </varlistentry> - </variablelist> - </sect2> - - <sect2 id="install.configure.ecommerce"> - <title>Ecommerce</title> - <variablelist> - <varlistentry id="install.configure.with-ccvs"> - <term> - <parameter>--with-ccvs[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Compile CCVS support into PHP 4. Please specify your CCVS base - install directory as DIR. - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.with-cybermut"> - <term> - <parameter>--with-cybermut[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Include Cybermut support into PHP 4. DIR is the Cybermut - SDK directory, which contains both <filename>libcm-mac.a</filename> - and <filename>cm-mac.h</filename>. - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.with-mck"> - <term> - <parameter>--with-mck[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Include Cybercash MCK support. DIR is the cybercash mck - build directory, which defaults to - <filename>/usr/src/mck-3.2.0.3-linux</filename>. For help, look - in <filename>extra/cyberlib</filename>. - </para> - <para> - PHP 4: Option not available; use <link - linkend="install.configure.with-cybercash">--with-cybercash</link> - instead. - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.with-cybercash"> - <term> - <parameter>--with-cybercash[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available; use <link - linkend="install.configure.with-mck">--with-mck</link> - instead. - </para> - <para> - PHP 4: Include CyberCash support. DIR is the CyberCash MCK install - directory. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-pfpro"> - <term> - <parameter>--with-pfpro[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Include Verisign Payflow Pro support - </para> + <varlistentry id="install.configure.with-tux=MODULEDIR"> + <term> + <parameter>--with-tux=MODULEDIR</parameter> + </term> + <listitem> + <para> + Build PHP as a TUX module (Linux only). + </para> </listitem> </varlistentry> - </variablelist> - </sect2> - - <sect2 id="install.configure.graphics"> - <title>Graphics</title> - <variablelist> - <varlistentry id="install.configure.enable-freetype-4bit-antialias-hack"> + <varlistentry id="install.configure.enable-debug"> <term> - <parameter>--enable-freetype-4bit-antialias-hack</parameter> + <parameter>--enable-debug</parameter> </term> <listitem> <para> - PHP 3: Option not available in PHP 3 + Compile with debugging symbols. </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-layout=TYPE"> + <term> + <parameter>--with-layout=TYPE</parameter> + </term> + <listitem> <para> - PHP 4: Include support for FreeType2 (experimental). + Sets how installed files will be laid out. Type is one of PHP (default) or GNU. </para> </listitem> </varlistentry> - <varlistentry id="install.configure.with-gd"> + <varlistentry id="install.configure.with-config-file-path=PATH"> <term> - <parameter>--with-gd[=DIR]</parameter> + <parameter>--with-config-file-path=PATH</parameter> </term> <listitem> <para> - PHP 3: Include GD support (DIR is GD's install dir). + Sets the path in which to look for php.ini, defaults to PREFIX/lib. </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-pear=DIR"> + <term> + <parameter>--with-pear=DIR</parameter> + </term> + <listitem> <para> - PHP 4: Include GD support (DIR is GD's install dir). Set DIR to shared - to build as a dl, or shared,DIR to build as a dl and still specify DIR. + Install PEAR in DIR (default PREFIX/lib/php). </para> </listitem> </varlistentry> - <varlistentry id="install.configure.without-gd"> + <varlistentry id="install.configure.without-pear"> <term> - <parameter>--without-gd</parameter> + <parameter>--without-pear</parameter> </term> <listitem> <para> - PHP 3, PHP 4: Disable GD support. + Do not install PEAR. </para> </listitem> </varlistentry> - - <varlistentry id="install.configure.with-imagick"> + <varlistentry id="install.configure.enable-safe-mode"> <term> - <parameter>--with-imagick[=DIR]</parameter> + <parameter>--enable-safe-mode</parameter> </term> <listitem> <para> - PHP 3: Include ImageMagick support. DIR is the install - directory, and if left out, PHP will try to find it on its - own. [experimental] + Enable safe mode by default. </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-exec-dir[=DIR]"> + <term> + <parameter>--with-exec-dir[=DIR]</parameter> + </term> + <listitem> <para> - PHP 4: Option not available in PHP 4 + Only allow executables in DIR when in safe mode defaults to /usr/local/php/bin. </para> </listitem> </varlistentry> - <varlistentry id="install.configure.with-jpeg-dir"> + <varlistentry id="install.configure.with-openssl[=DIR]"> <term> - <parameter>--with-jpeg-dir[=DIR]</parameter> + <parameter>--with-openssl[=DIR]</parameter> </term> <listitem> <para> - PHP 3: jpeg dir for pdflib 2.0 + Include OpenSSL support (requires OpenSSL >= 0.9.5). </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.enable-sigchild"> + <term> + <parameter>--enable-sigchild</parameter> + </term> + <listitem> <para> - PHP 4: jpeg dir for pdflib 3.x and 4.x + Enable PHP's own SIGCHLD handler. </para> </listitem> </varlistentry> - <varlistentry id="install.configure.with-png-dir"> + <varlistentry id="install.configure.enable-magic-quotes"> <term> - <parameter>--with-png-dir[=DIR]</parameter> + <parameter>--enable-magic-quotes</parameter> </term> <listitem> <para> - PHP 3: Option not available in PHP 3 + Enable magic quotes by default. </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.disable-rpath"> + <term> + <parameter>--disable-rpath</parameter> + </term> + <listitem> <para> - PHP 4: png dir for pdflib 3.x and 4.x + Disable passing additional runtime library search paths. </para> </listitem> </varlistentry> - <varlistentry id="install.configure.enable-t1lib"> + <varlistentry id="install.configure.enable-libgcc"> <term> - <parameter>--enable-t1lib</parameter> + <parameter>--enable-libgcc</parameter> </term> <listitem> <para> - PHP 3: Enable t1lib support. + Enable explicitly linking against libgcc. </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.disable-short-tags"> + <term> + <parameter>--disable-short-tags</parameter> + </term> + <listitem> <para> - PHP 4: Option not available; use <link - linkend="install.configure.with-t1lib">--with-t1lib</link> - instead. + Disable the short-form &lt;? start tag by default. </para> </listitem> </varlistentry> - <varlistentry id="install.configure.with-t1lib"> + <varlistentry id="install.configure.enable-dmalloc"> <term> - <parameter>--with-t1lib[=DIR]</parameter> + <parameter>--enable-dmalloc</parameter> </term> <listitem> <para> - PHP 3: Option not available; use <link - linkend="install.configure.enable-t1lib">--enable-t1lib</link> - instead. + Enable dmalloc. </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.enable-php-streams"> + <term> + <parameter>--enable-php-streams</parameter> + </term> + <listitem> <para> - PHP 4: Include T1lib support. + Include experimental php streams. Do not use unless you are testing the code! </para> </listitem> </varlistentry> - <varlistentry id="install.configure.with-tiff-dir"> + <varlistentry id="install.configure.with-zlib-dir=&lt;DIR&gt;"> <term> - <parameter>--with-tiff-dir[=DIR]</parameter> + <parameter>--with-zlib-dir=&lt;DIR&gt;</parameter> </term> <listitem> <para> - PHP 3: tiff dir for pdflib 2.0 + Define the location of zlib install directory. </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-zlib[=DIR]"> + <term> + <parameter>--with-zlib[=DIR]</parameter> + </term> + <listitem> <para> - PHP 4: tiff dir for pdflib 3.x and 4.x + Include zlib support (requires zlib >= 1.0.9). DIR is the zlib install directory. </para> </listitem> </varlistentry> - <varlistentry id="install.configure.with-ttf"> + <varlistentry id="install.configure.with-aspell[=DIR]"> <term> - <parameter>--with-ttf[=DIR]</parameter> + <parameter>--with-aspell[=DIR]</parameter> </term> <listitem> <para> - PHP 3, PHP 4: Include FreeType support + Include ASPELL support. </para> </listitem> </varlistentry> - <varlistentry id="install.configure.with-xpm-dir"> + <varlistentry id="install.configure.enable-bcmath"> <term> - <parameter>--with-xpm-dir[=DIR]</parameter> + <parameter>--enable-bcmath</parameter> </term> <listitem> <para> - PHP 3: Option not available in PHP 3 + Enable bc style precision math functions. </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-bz2[=DIR]"> + <term> + <parameter>--with-bz2[=DIR]</parameter> + </term> + <listitem> <para> - PHP 4: xpm dir for gd-1.8+ + Include BZip2 support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.enable-calendar"> + <term> + <parameter>--enable-calendar</parameter> + </term> + <listitem> + <para> + Enable support for calendar conversion. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-ccvs[=DIR]"> + <term> + <parameter>--with-ccvs[=DIR]</parameter> + </term> + <listitem> + <para> + Include CCVS support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-cpdflib[=DIR]"> + <term> + <parameter>--with-cpdflib[=DIR]</parameter> + </term> + <listitem> + <para> + Include cpdflib support (requires cpdflib >= 2). DIR is the cpdfllib install + directory, defaults to /usr. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-jpeg-dir[=DIR]"> + <term> + <parameter>--with-jpeg-dir[=DIR]</parameter> + </term> + <listitem> + <para> + jpeg dir for cpdflib 2.x. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-tiff-dir[=DIR]"> + <term> + <parameter>--with-tiff-dir[=DIR]</parameter> + </term> + <listitem> + <para> + tiff dir for cpdflib 2.x. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-crack[=DIR]"> + <term> + <parameter>--with-crack[=DIR]</parameter> + </term> + <listitem> + <para> + Include crack support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.enable-ctype"> + <term> + <parameter>--enable-ctype</parameter> + </term> + <listitem> + <para> + Enable ctype support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-curl[=DIR]"> + <term> + <parameter>--with-curl[=DIR]</parameter> + </term> + <listitem> + <para> + Include CURL support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-cybercash[=DIR]"> + <term> + <parameter>--with-cybercash[=DIR]</parameter> + </term> + <listitem> + <para> + Include CyberCash support. DIR is the CyberCash MCK install directory. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-cybermut[=DIR]"> + <term> + <parameter>--with-cybermut[=DIR]</parameter> + </term> + <listitem> + <para> + Include CyberMut (french Credit Mutuel telepaiement). + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-cyrus"> + <term> + <parameter>--with-cyrus</parameter> + </term> + <listitem> + <para> + Include cyrus imap support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-db"> + <term> + <parameter>--with-db</parameter> + </term> + <listitem> + <para> + Include old xDBM support (deprecated). + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.enable-dba=shared"> + <term> + <parameter>--enable-dba=shared</parameter> + </term> + <listitem> + <para> + Build DBA as a shared module. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-gdbm[=DIR]"> + <term> + <parameter>--with-gdbm[=DIR]</parameter> + </term> + <listitem> + <para> + Include GDBM support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-ndbm[=DIR]"> + <term> + <parameter>--with-ndbm[=DIR]</parameter> + </term> + <listitem> + <para> + Include NDBM support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-db2[=DIR]"> + <term> + <parameter>--with-db2[=DIR]</parameter> + </term> + <listitem> + <para> + Include Berkeley DB2 support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-db3[=DIR]"> + <term> + <parameter>--with-db3[=DIR]</parameter> + </term> + <listitem> + <para> + Include Berkeley DB3 support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-dbm[=DIR]"> + <term> + <parameter>--with-dbm[=DIR]</parameter> + </term> + <listitem> + <para> + Include DBM support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-cdb[=DIR]"> + <term> + <parameter>--with-cdb[=DIR]</parameter> + </term> + <listitem> + <para> + Include CDB support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.enable-dbase"> + <term> + <parameter>--enable-dbase</parameter> + </term> + <listitem> + <para> + Enable the bundled dbase library. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-dbplus"> + <term> + <parameter>--with-dbplus</parameter> + </term> + <listitem> + <para> + Include dbplus support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.enable-dbx"> + <term> + <parameter>--enable-dbx</parameter> + </term> + <listitem> + <para> + Enable dbx. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-dom[=DIR]"> + <term> + <parameter>--with-dom[=DIR]</parameter> + </term> + <listitem> + <para> + Include DOM support (requires libxml >= 2.4.2). DIR is the libxml install + directory, defaults to /usr. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.enable-exif"> + <term> + <parameter>--enable-exif</parameter> + </term> + <listitem> + <para> + Enable exif support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-fbsql[=DIR]"> + <term> + <parameter>--with-fbsql[=DIR]</parameter> + </term> + <listitem> + <para> + Include FrontBase support. DIR is the FrontBase base directory. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-fdftk[=DIR]"> + <term> + <parameter>--with-fdftk[=DIR]</parameter> + </term> + <listitem> + <para> + Include fdftk support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.enable-filepro"> + <term> + <parameter>--enable-filepro</parameter> + </term> + <listitem> + <para> + Enable the bundled read-only filePro support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-fribidi[=DIR]"> + <term> + <parameter>--with-fribidi[=DIR]</parameter> + </term> + <listitem> + <para> + Include fribidi support (requires FriBidi >=0.1.12). DIR is the fribidi + installation directory - default /usr/local/. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.enable-ftp"> + <term> + <parameter>--enable-ftp</parameter> + </term> + <listitem> + <para> + Enable FTP support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-gd[=DIR]"> + <term> + <parameter>--with-gd[=DIR]</parameter> + </term> + <listitem> + <para> + Include GD support (DIR is GD's install dir). Set DIR to shared to build as + a dl, or shared,DIR to build as a dl and still specify DIR. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.enable-gd-native-ttf"> + <term> + <parameter>--enable-gd-native-ttf</parameter> + </term> + <listitem> + <para> + GD: Enable TrueType string function in gd. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-jpeg-dir=DIR"> + <term> + <parameter>--with-jpeg-dir=DIR</parameter> + </term> + <listitem> + <para> + GD: Set the path to libjpeg install prefix. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-png-dir=DIR"> + <term> + <parameter>--with-png-dir=DIR</parameter> + </term> + <listitem> + <para> + GD: Set the path to libpng install prefix. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-xpm-dir=DIR"> + <term> + <parameter>--with-xpm-dir=DIR</parameter> + </term> + <listitem> + <para> + GD: Set the path to libXpm install prefix. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-freetype-dir=DIR"> + <term> + <parameter>--with-freetype-dir=DIR</parameter> + </term> + <listitem> + <para> + GD: Set the path to freetype2 install prefix. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-ttf[=DIR]"> + <term> + <parameter>--with-ttf[=DIR]</parameter> + </term> + <listitem> + <para> + GD: Include FreeType 1.x support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-t1lib[=DIR]"> + <term> + <parameter>--with-t1lib[=DIR]</parameter> + </term> + <listitem> + <para> + GD: Include T1lib support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-gettext[=DIR]"> + <term> + <parameter>--with-gettext[=DIR]</parameter> + </term> + <listitem> + <para> + Include GNU gettext support. DIR is the gettext install directory, + defaults to /usr/local. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-gmp"> + <term> + <parameter>--with-gmp</parameter> + </term> + <listitem> + <para> + Include gmp support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-hyperwave"> + <term> + <parameter>--with-hyperwave</parameter> + </term> + <listitem> + <para> + Include Hyperwave support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-icap[=DIR]"> + <term> + <parameter>--with-icap[=DIR]</parameter> + </term> + <listitem> + <para> + Include ICAP support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-iconv[=DIR]"> + <term> + <parameter>--with-iconv[=DIR]</parameter> + </term> + <listitem> + <para> + Include iconv support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-imap[=DIR]"> + <term> + <parameter>--with-imap[=DIR]</parameter> + </term> + <listitem> + <para> + Include IMAP support. DIR is the c-client install prefix. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-kerberos[=DIR]"> + <term> + <parameter>--with-kerberos[=DIR]</parameter> + </term> + <listitem> + <para> + IMAP: Include Kerberos support. DIR is the Kerberos install dir. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-imap-ssl[=DIR]"> + <term> + <parameter>--with-imap-ssl[=DIR]</parameter> + </term> + <listitem> + <para> + IMAP: Include SSL support. DIR is the OpenSSL install dir. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-informix[=DIR]"> + <term> + <parameter>--with-informix[=DIR]</parameter> + </term> + <listitem> + <para> + Include Informix support. DIR is the Informix base install directory, + defaults to nothing. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-ingres[=DIR]"> + <term> + <parameter>--with-ingres[=DIR]</parameter> + </term> + <listitem> + <para> + Include Ingres II support. DIR is the Ingres base directory (default /II/ingres). + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-interbase[=DIR]"> + <term> + <parameter>--with-interbase[=DIR]</parameter> + </term> + <listitem> + <para> + Include InterBase support. DIR is the InterBase base install directory, + defaults to /usr/interbase. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-ircg-config"> + <term> + <parameter>--with-ircg-config</parameter> + </term> + <listitem> + <para> + Path to the ircg-config script. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-ircg"> + <term> + <parameter>--with-ircg</parameter> + </term> + <listitem> + <para> + Include ircg support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-java[=DIR]"> + <term> + <parameter>--with-java[=DIR]</parameter> + </term> + <listitem> + <para> + Include Java support. DIR is the base install directory for the JDK. + This extension can only be built as a shared dl. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-ldap[=DIR]"> + <term> + <parameter>--with-ldap[=DIR]</parameter> + </term> + <listitem> + <para> + Include LDAP support. DIR is the LDAP base install directory. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.enable-mailparse"> + <term> + <parameter>--enable-mailparse</parameter> + </term> + <listitem> + <para> + Enable mailparse support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.enable-mbstring"> + <term> + <parameter>--enable-mbstring</parameter> + </term> + <listitem> + <para> + Enable multibyte string support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.enable-mbstr-enc-trans"> + <term> + <parameter>--enable-mbstr-enc-trans</parameter> + </term> + <listitem> + <para> + Enable japanese encoding translation. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-mcal[=DIR]"> + <term> + <parameter>--with-mcal[=DIR]</parameter> + </term> + <listitem> + <para> + Include MCAL support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-mcrypt[=DIR]"> + <term> + <parameter>--with-mcrypt[=DIR]</parameter> + </term> + <listitem> + <para> + Include mcrypt support. DIR is the mcrypt install directory. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-mhash[=DIR]"> + <term> + <parameter>--with-mhash[=DIR]</parameter> + </term> + <listitem> + <para> + Include mhash support. DIR is the mhash install directory. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-ming[=DIR]"> + <term> + <parameter>--with-ming[=DIR]</parameter> + </term> + <listitem> + <para> + Include ming support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-mnogosearch[=DIR]"> + <term> + <parameter>--with-mnogosearch[=DIR]</parameter> + </term> + <listitem> + <para> + Include mnoGoSearch support. DIR is the mnoGoSearch base install directory, + defaults to /usr/local/mnogosearch. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-msql[=DIR]"> + <term> + <parameter>--with-msql[=DIR]</parameter> + </term> + <listitem> + <para> + Include mSQL support. DIR is the mSQL base install directory, defaults + to /usr/local/Hughes. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-muscat[=DIR]"> + <term> + <parameter>--with-muscat[=DIR]</parameter> + </term> + <listitem> + <para> + Include muscat support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-mysql[=DIR]"> + <term> + <parameter>--with-mysql[=DIR]</parameter> + </term> + <listitem> + <para> + Include MySQL support. DIR is the MySQL base directory. If unspecified, + the bundled MySQL library will be used. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-ncurses"> + <term> + <parameter>--with-ncurses</parameter> + </term> + <listitem> + <para> + Include ncurses support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-oci8[=DIR]"> + <term> + <parameter>--with-oci8[=DIR]</parameter> + </term> + <listitem> + <para> + Include Oracle-oci8 support. Default DIR is ORACLE_HOME. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-adabas[=DIR]"> + <term> + <parameter>--with-adabas[=DIR]</parameter> + </term> + <listitem> + <para> + Include Adabas D support. DIR is the Adabas base install directory, + defaults to /usr/local. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-sapdb[=DIR]"> + <term> + <parameter>--with-sapdb[=DIR]</parameter> + </term> + <listitem> + <para> + Include SAP DB support. DIR is SAP DB base install directory, + defaults to /usr/local. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-solid[=DIR]"> + <term> + <parameter>--with-solid[=DIR]</parameter> + </term> + <listitem> + <para> + Include Solid support. DIR is the Solid base install directory, + defaults to /usr/local/solid. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-ibm-db2[=DIR]"> + <term> + <parameter>--with-ibm-db2[=DIR]</parameter> + </term> + <listitem> + <para> + Include IBM DB2 support. DIR is the DB2 base install directory, + defaults to /home/db2inst1/sqllib. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-empress[=DIR]"> + <term> + <parameter>--with-empress[=DIR]</parameter> + </term> + <listitem> + <para> + Include Empress support. DIR is the Empress base install directory, + defaults to $EMPRESSPATH. From PHP4, this option only supports + Empress Version 8.60 and above. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-empress-bcs[=DIR]"> + <term> + <parameter>--with-empress-bcs[=DIR]</parameter> + </term> + <listitem> + <para> + Include Empress Local Access support. DIR is the Empress base + install directory, defaults to $EMPRESSPATH. From PHP4, + this option only supports Empress Version 8.60 and above. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-velocis[=DIR]"> + <term> + <parameter>--with-velocis[=DIR]</parameter> + </term> + <listitem> + <para> + Include Velocis support. DIR is the Velocis base install directory, + defaults to /usr/local/velocis. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-custom-odbc[=DIR]"> + <term> + <parameter>--with-custom-odbc[=DIR]</parameter> + </term> + <listitem> + <para> + Include a user defined ODBC support. The DIR is ODBC install base directory, + which defaults to /usr/local. Make sure to define CUSTOM_ODBC_LIBS and have + some odbc.h in your include dirs. E.g., you should define following for Sybase SQL + Anywhere 5.5.00 on QNX, prior to run configure script: +<![CDATA[ + CPPFLAGS="-DODBC_QNX -DSQLANY_BUG" + LDFLAGS=-lunix + CUSTOM_ODBC_LIBS="-ldblib -lodbc". +]]> + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-iodbc[=DIR]"> + <term> + <parameter>--with-iodbc[=DIR]</parameter> + </term> + <listitem> + <para> + Include iODBC support. DIR is the iODBC base install directory, + defaults to /usr/local. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-esoob[=DIR]"> + <term> + <parameter>--with-esoob[=DIR]</parameter> + </term> + <listitem> + <para> + Include Easysoft OOB support. DIR is the OOB base install directory, + defaults to /usr/local/easysoft/oob/client. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-unixODBC[=DIR]"> + <term> + <parameter>--with-unixODBC[=DIR]</parameter> + </term> + <listitem> + <para> + Include unixODBC support. DIR is the unixODBC base install directory, + defaults to /usr/local. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-openlink[=DIR]"> + <term> + <parameter>--with-openlink[=DIR]</parameter> + </term> + <listitem> + <para> + Include OpenLink ODBC support. DIR is the OpenLink base install directory, + defaults to /usr/local. This is the same as iODBC. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-dbmaker[=DIR]"> + <term> + <parameter>--with-dbmaker[=DIR]</parameter> + </term> + <listitem> + <para> + Include DBMaker support. DIR is the DBMaker base install directory, + defaults to where the latest version of DBMaker is installed + (such as /home/dbmaker/3.6). + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-oracle[=DIR]"> + <term> + <parameter>--with-oracle[=DIR]</parameter> + </term> + <listitem> + <para> + Include Oracle-oci7 support. Default DIR is ORACLE_HOME. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-ovrimos[=DIR]"> + <term> + <parameter>--with-ovrimos[=DIR]</parameter> + </term> + <listitem> + <para> + Include Ovrimos SQL Server support. DIR is the Ovrimos' libsqlcli install directory. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.enable-pcntl"> + <term> + <parameter>--enable-pcntl</parameter> + </term> + <listitem> + <para> + Enable experimental pcntl support (CGI ONLY!) + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.without-pcre-regex"> + <term> + <parameter>--without-pcre-regex</parameter> + </term> + <listitem> + <para> + Do not include Perl Compatible Regular Expressions support. + Use --with-pcre-regex=DIR to specify DIR where PCRE's include and library files are located, if not using bundled library. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-pdflib[=DIR]"> + <term> + <parameter>--with-pdflib[=DIR]</parameter> + </term> + <listitem> + <para> + Include PDFlib support. DIR is the pdflib base install directory, + defaults to /usr/local. Set DIR to shared to build as dl, or + shared,DIR to build as dl and still specify DIR. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-jpeg-dir[=DIR]"> + <term> + <parameter>--with-jpeg-dir[=DIR]</parameter> + </term> + <listitem> + <para> + PDFLIB: define libjpeg install directory. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-png-dir[=DIR]"> + <term> + <parameter>--with-png-dir[=DIR]</parameter> + </term> + <listitem> + <para> + PDFLIB: define libpng install directory. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-tiff-dir[=DIR]"> + <term> + <parameter>--with-tiff-dir[=DIR]</parameter> + </term> + <listitem> + <para> + PDFLIB: define libtiff install directory. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-pfpro[=DIR]"> + <term> + <parameter>--with-pfpro[=DIR]</parameter> + </term> + <listitem> + <para> + Include Verisign Payflow Pro support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-pgsql[=DIR]"> + <term> + <parameter>--with-pgsql[=DIR]</parameter> + </term> + <listitem> + <para> + Include PostgreSQL support. DIR is the PostgreSQL base install directory, + defaults to /usr/local/pgsql. Set DIR to shared to build as a dl, or + shared,DIR to build as a dl and still specify DIR. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.disable-posix"> + <term> + <parameter>--disable-posix</parameter> + </term> + <listitem> + <para> + Disable POSIX-like functions. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-pspell[=DIR]"> + <term> + <parameter>--with-pspell[=DIR]</parameter> + </term> + <listitem> + <para> + Include PSPELL support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-qtdom"> + <term> + <parameter>--with-qtdom</parameter> + </term> + <listitem> + <para> + Include QtDOM support (requires Qt >= 2.2.0). + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-libedit[=DIR]"> + <term> + <parameter>--with-libedit[=DIR]</parameter> + </term> + <listitem> + <para> + Include libedit readline replacement. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-readline[=DIR]"> + <term> + <parameter>--with-readline[=DIR]</parameter> + </term> + <listitem> + <para> + Include readline support. DIR is the readline install directory. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-recode[=DIR]"> + <term> + <parameter>--with-recode[=DIR]</parameter> + </term> + <listitem> + <para> + Include recode support. DIR is the recode install directory. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-satellite[=DIR]"> + <term> + <parameter>--with-satellite[=DIR]</parameter> + </term> + <listitem> + <para> + Enable CORBA support via Satellite (EXPERIMENTIAL) DIR is the base + directory for ORBit. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-mm[=DIR]"> + <term> + <parameter>--with-mm[=DIR]</parameter> + </term> + <listitem> + <para> + Include mm support for session storage. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.enable-trans-sid"> + <term> + <parameter>--enable-trans-sid</parameter> + </term> + <listitem> + <para> + Enable transparent session id propagation. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.disable-session"> + <term> + <parameter>--disable-session</parameter> + </term> + <listitem> + <para> + Disable session support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.enable-shmop"> + <term> + <parameter>--enable-shmop</parameter> + </term> + <listitem> + <para> + Enable shmop support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-snmp[=DIR]"> + <term> + <parameter>--with-snmp[=DIR]</parameter> + </term> + <listitem> + <para> + Include SNMP support. DIR is the SNMP base install directory, defaults to + searching through a number of common locations for the snmp install. Set DIR + to shared to build as a dl, or shared,DIR to build as a dl and still specify DIR. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.enable-ucd-snmp-hack"> + <term> + <parameter>--enable-ucd-snmp-hack</parameter> + </term> + <listitem> + <para> + Enable UCD SNMP hack. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.enable-sockets"> + <term> + <parameter>--enable-sockets</parameter> + </term> + <listitem> + <para> + Enable sockets support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-regex=TYPE"> + <term> + <parameter>--with-regex=TYPE</parameter> + </term> + <listitem> + <para> + regex library type: system, apache, php. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-system-regex"> + <term> + <parameter>--with-system-regex</parameter> + </term> + <listitem> + <para> + Use system regex library (deprecated). + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-swf[=DIR]"> + <term> + <parameter>--with-swf[=DIR]</parameter> + </term> + <listitem> + <para> + Include swf support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-sybase[=DIR]"> + <term> + <parameter>--with-sybase[=DIR]</parameter> + </term> + <listitem> + <para> + Include Sybase-DB support. DIR is the Sybase home directory, + defaults to /home/sybase. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-sybase-ct[=DIR]"> + <term> + <parameter>--with-sybase-ct[=DIR]</parameter> + </term> + <listitem> + <para> + Include Sybase-CT support. DIR is the Sybase home directory. + Defaults to /home/sybase. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.enable-sysvsem"> + <term> + <parameter>--enable-sysvsem</parameter> + </term> + <listitem> + <para> + Enable System V semaphore support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.enable-sysvshm"> + <term> + <parameter>--enable-sysvshm</parameter> + </term> + <listitem> + <para> + Enable the System V shared memory support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-vpopmail[=DIR]"> + <term> + <parameter>--with-vpopmail[=DIR]</parameter> + </term> + <listitem> + <para> + Include vpopmail support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.enable-wddx"> + <term> + <parameter>--enable-wddx</parameter> + </term> + <listitem> + <para> + Enable WDDX support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.disable-xml"> + <term> + <parameter>--disable-xml</parameter> + </term> + <listitem> + <para> + Disable XML support using bundled expat lib. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-expat-dir=DIR"> + <term> + <parameter>--with-expat-dir=DIR</parameter> + </term> + <listitem> + <para> + XML: external libexpat install dir. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-xmlrpc[=DIR]"> + <term> + <parameter>--with-xmlrpc[=DIR]</parameter> + </term> + <listitem> + <para> + Include XMLRPC-EPI support. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-tsrm-pthreads"> + <term> + <parameter>--with-tsrm-pthreads</parameter> + </term> + <listitem> + <para> + Use POSIX threads (default). + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.enable-shared[=PKGS]"> + <term> + <parameter>--enable-shared[=PKGS]</parameter> + </term> + <listitem> + <para> + Build shared libraries [default=yes]. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.enable-static[=PKGS]"> + <term> + <parameter>--enable-static[=PKGS]</parameter> + </term> + <listitem> + <para> + Build static libraries [default=yes]. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.enable-fast-install[=PKGS]"> + <term> + <parameter>--enable-fast-install[=PKGS]</parameter> + </term> + <listitem> + <para> + Optimize for fast installation [default=yes]. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-gnu-ld"> + <term> + <parameter>--with-gnu-ld</parameter> + </term> + <listitem> + <para> + Assume the C compiler uses GNU ld [default=no]. + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.disable-libtool-lock"> + <term> + <parameter>--disable-libtool-lock</parameter> + </term> + <listitem> + <para> + Avoid locking (might break parallel builds). + </para> + </listitem> + </varlistentry> + <varlistentry id="install.configure.with-pic"> + <term> + <parameter>--with-pic</parameter> + </term> + <listitem> + <para> + Try to use only PIC/non-PIC objects [default=use both]. </para> </listitem> </varlistentry> - </variablelist> - </sect2> - - <sect2 id="install.configure.misc"> - <title>Miscellaneous</title> - <para> - These are being classified over time, where appropriate. - </para> - - <variablelist> - - <varlistentry id="install.configure.gmp"> - <term> - <parameter>--with-gmp</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4 : Include GMP support. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.disable-bcmath"> - <term> - <parameter>--disable-bcmath</parameter> - </term> - <listitem> - <para> - PHP 3: Compile without BC arbitrary precision math - functions. These functions allow you to operate with numbers - outside of the ranges allowed by regular integers and floats; - see <link linkend="ref.bc">BCMath Arbitrary Precision - Mathematics Functions</link> for more information. - </para> - <para> - PHP 4: Option not available; bcmath is not compiled in by - default. Use <link - linkend="install.configure.enable-bcmath">--enable-bcmath</link> - to compile it in. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.disable-display-source"> - <term> - <parameter>--disable-display-source</parameter> - </term> - <listitem> - <para> - PHP 3: Compile without displaying source support - </para> - <para> - PHP 4: Option not available in PHP 4 - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.disable-libtool-lock"> - <term> - <parameter>--disable-libtool-lock</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: avoid locking (might break parallel builds) - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.disable-pear"> - <term> - <parameter>--disable-pear</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Do not install PEAR - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.disable-pic"> - <term> - <parameter>--disable-pic</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Disable PIC for shared objects - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.disable-posix"> - <term> - <parameter>--disable-posix</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3; use <link - linkend="install.configure.without-posix">--without-posix</link> - instead. - </para> - <para> - PHP 4: Disable POSIX-like functions - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-pcntl"> - <term> - <parameter>--enable-pcntl</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Enable process control functions. (fork, waitpid, - signal, et. al.) - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.disable-rpath"> - <term> - <parameter>--disable-rpath</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Disable passing additional runtime library search paths - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.disable-session"> - <term> - <parameter>--disable-session</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Disable session support - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-bcmath"> - <term> - <parameter>--enable-bcmath</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3; bcmath is compiled in - by default. Use <link - linkend="install.configure.disable-bcmath">--disable-bcmath</link> - to disable it. - </para> - <para> - PHP 4: Compile with bc style precision math functions. Read - README-BCMATH for instructions on how to get this module - installed. These functions allow you to operate with numbers - outside of the ranges allowed by regular integers and floats; - see <link linkend="ref.bc">BCMath Arbitrary Precision - Mathematics Functions</link> for more information. - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-c9x-inline"> - <term> - <parameter>--enable-c9x-inline</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Enable C9x-inline semantics - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-calendar"> - <term> - <parameter>--enable-calendar</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Enable support for calendar conversion - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-debug"> - <term> - <parameter>--enable-debug</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Compile with debugging symbols. - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-debugger"> - <term> - <parameter>--enable-debugger</parameter> - </term> - <listitem> - <para> - PHP 3: Compile with remote debugging functions - </para> - <para> - PHP 4: Option not available in PHP 4 - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-discard-path"> - <term> - <parameter>--enable-discard-path</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: If this is enabled, the PHP CGI binary can safely be - placed outside of the web tree and people will not be able to circumvent - .htaccess security. - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-dmalloc"> - <term> - <parameter>--enable-dmalloc</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Enable dmalloc - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-exif"> - <term> - <parameter>--enable-exif</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Enable exif support - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-experimental-zts"> - <term> - <parameter>--enable-experimental-zts</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: This will most likely break your build - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-fast-install"> - <term> - <parameter>--enable-fast-install[=PKGS]</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: optimize for fast installation [default=yes] - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-force-cgi-redirect"> - <term> - <parameter>--enable-force-cgi-redirect</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Enable the security check for internal server redirects. - You should use this if you are running the CGI version with Apache. - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-inline-optimization"> - <term> - <parameter>--enable-inline-optimization</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: If you have much memory and are using gcc, you might try this. - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-libgcc"> - <term> - <parameter>--enable-libgcc</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Enable explicitly linking against libgcc - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-maintainer-mode"> - <term> - <parameter>--enable-maintainer-mode</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: enable make rules and dependencies not useful (and - sometimes confusing) to the casual installer - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-mbstr-enc-trans"> - <term> - <parameter>--enable-mbstr-enc-trans</parameter> - </term> - <listitem> - <para> - PHP 4: enable http input character automatic detection and - translation for multi-byte character encodings. - </para> - <warning> - <para> - This switch is only available for PHP 4.0.6 or higher. - </para> - </warning> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-mbstring"> - <term> - <parameter>--enable-mbstring</parameter> - </term> - <listitem> - <para> - PHP 4: enable multi-byte character encoding related functions. - </para> - <warning> - <para> - This switch is only available for PHP 4.0.6 or higher. - </para> - </warning> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-memory-limit"> - <term> - <parameter>--enable-memory-limit</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Compile with memory limit support. [default=no] - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-safe-mode"> - <term> - <parameter>--enable-safe-mode</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Enable safe mode by default. - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-satellite"> - <term> - <parameter>--enable-satellite</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Enable CORBA support via Satellite (Requires ORBit) - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-shared"> - <term> - <parameter>--enable-shared[=PKGS]</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: build shared libraries [default=yes] - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-sigchild"> - <term> - <parameter>--enable-sigchild</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Enable PHP's own SIGCHLD handler. - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-static"> - <term> - <parameter>--enable-static[=PKGS]</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: build static libraries [default=yes] - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-sysvsem"> - <term> - <parameter>--enable-sysvsem</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Enable System V semaphore support. - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-sysvshm"> - <term> - <parameter>--enable-sysvshm</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Enable the System V shared memory support - </para> - </listitem> - </varlistentry> - <varlistentry id="install.configure.enable-trans-sid"> - <term> - <parameter>--enable-trans-sid</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Enable transparent session id propagation - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-cdb"> - <term> - <parameter>--with-cdb[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Include CDB support - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-config-file-path"> - <term> - <parameter>--with-config-file-path=PATH</parameter> - </term> - <listitem> - <para> - PHP 3: Sets the path in which to look for php3.ini. Defaults to - <filename>/usr/local/lib</filename> - </para> - <para> - PHP 4: Sets the path in which to look for <filename>php.ini</filename>. - Defaults to <filename>/usr/local/lib</filename> - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-cpdflib"> - <term> - <parameter>--with-cpdflib[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Include ClibPDF support. DIR is the ClibPDF install directory, - defaults to /usr/local. - </para> - <para> - PHP 4: Include cpdflib support (requires cpdflib &gt;= 2). DIR is the - cpdfllib install directory, defaults to /usr. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-esoob"> - <term> - <parameter>--with-esoob[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Include Easysoft OOB support. DIR is the OOB base install - directory, defaults to /usr/local/easysoft/oob/client. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-exec-dir"> - <term> - <parameter>--with-exec-dir[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Only allow executables in DIR when in safe mode defaults - to /usr/local/php/bin - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-fdftk"> - <term> - <parameter>--with-fdftk[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Include fdftk support. DIR is the fdftk install directory, - defaults to /usr/local. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-gnu-ld"> - <term> - <parameter>--with-gnu-ld</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: assume the C compiler uses GNU ld [default=no] - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-icap"> - <term> - <parameter>--with-icap[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Include ICAP support. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-imap"> - <term> - <parameter>--with-imap[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Include IMAP support. DIR is the IMAP include and - c-client.a directory. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-imsp"> - <term> - <parameter>--with-imsp[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Include IMSP support (DIR is IMSP's include dir and libimsp.a - dir). - </para> - <para> - PHP 4: Option not available in PHP 4 - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-java"> - <term> - <parameter>--with-java[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Include Java support. DIR is the base install directory for the - JDK. This extension can only be built as a shared dl. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-kerberos"> - <term> - <parameter>--with-kerberos[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Include Kerberos support in IMAP. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-mcal"> - <term> - <parameter>--with-mcal[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Include MCAL support. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-mcrypt"> - <term> - <parameter>--with-mcrypt[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Include mcrypt support. DIR is the mcrypt install - directory. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-mhash"> - <term> - <parameter>--with-mhash[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Include mhash support. DIR is the mhash install directory. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-mm"> - <term> - <parameter>--with-mm[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Include mm support for session storage - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-mod_charset"> - <term> - <parameter>--with-mod_charset</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Enable transfer tables for mod_charset (Rus Apache). - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-pdflib"> - <term> - <parameter>--with-pdflib[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Include pdflib support (tested with 0.6 and 2.0). DIR is - the pdflib install directory, which defaults to - <filename>/usr/local</filename>. - </para> - <para> - PHP 4: Include pdflib 3.x/4.x support. DIR is the pdflib install - location, which defaults to <filename>/usr/local</filename>. - </para> - <para> - PHP 4 and PDFlib 3.x/4.x require that you have the JPEG and - TIFF libraries available. When compiling PDFlib support, use - the <link - linkend="install.configure.with-jpeg-dir">--with-jpeg-dir</link> - and <link - linkend="install.configure.with-tiff-dir">--with-tiff-dir</link> - configure options. You may wish to additionally specify the - <link - linkend="install.configure.with-png-dir">--with-png-dir</link> - and <link - linkend="install.configure.with-zlib-dir">--with-zlib-dir</link> - configure options to compile PNG and Zlib support into the - PDFlib extension. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.enable-shared-pdflib"> - <term> - <parameter>--enable-shared-pdflib</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Activate pdflib as shared library. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-readline"> - <term> - <parameter>--with-readline[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Include readline support. DIR is the readline install directory. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-regex"> - <term> - <parameter>--with-regex=TYPE</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: regex library type: system, apache, php - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-servlet"> - <term> - <parameter>--with-servlet[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Include servlet support. DIR is the base install - directory for the JSDK. This SAPI requires that the Java - extension be built as a shared dl. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-ming"> - <term> - <parameter>--with-ming</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Include Flash 4 support, with Ming - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-swf"> - <term> - <parameter>--with-swf[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Include swf support - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-system-regex"> - <term> - <parameter>--with-system-regex</parameter> - </term> - <listitem> - <para> - PHP 3: Do not use the bundled regex library - </para> - <para> - PHP 4: (deprecated) Use system regex library - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-tsrm-pth"> - <term> - <parameter>--with-tsrm-pth[=pth-config]</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Use GNU Pth. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-tsrm-pthreads"> - <term> - <parameter>--with-tsrm-pthreads</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Use POSIX threads (default) - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-x"> - <term> - <parameter>--with-x</parameter> - </term> - <listitem> - <para> - PHP 3: use the X Window System - </para> - <para> - PHP 4: Option not available in PHP 4 - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-bzip2"> - <term> - <parameter>--with-bz2[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 4: Include support bzip2. DIR - is the bzip2 install dir. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-zlib-dir"> - <term> - <parameter>--with-zlib-dir[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: zlib dir for pdflib 2.0 or include zlib support - </para> - <para> - PHP 4: zlib dir for pdflib 3.x/4.x or include zlib support - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-zlib"> - <term> - <parameter>--with-zlib[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Include zlib support (requires zlib &gt;= 1.0.9). DIR is - the zlib install directory, defaults to /usr. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-zip"> - <term> - <parameter>--with-zip[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 4: Include zip support (requires zziplib &gt;= 0.10.6). DIR is - the zziplib install directory, defaults to /usr/local. - </para> - <para> - The latest version of zziplib can be found at <ulink - url="&url.zziplib;">&url.zziplib;</ulink>. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.without-pcre-regex"> - <term> - <parameter>--without-pcre-regex</parameter> - </term> - <listitem> - <para> - PHP 3: Don't include Perl Compatible Regular Expressions support - </para> - <para> - PHP 4: Do not include Perl Compatible Regular Expressions support. Use - --with-pcre-regex=DIR to specify DIR where PCRE's include and library - files are located, if not using bundled library. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.without-posix"> - <term> - <parameter>--without-posix</parameter> - </term> - <listitem> - <para> - PHP 3: Don't include POSIX functions - </para> - <para> - PHP 4: Option not available in PHP 4; use <link - linkend="install.configure.disable-posix">--disable-posix</link> - instead. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.enable-overload"> - <term> - <parameter>--enable-overload</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Enable object property and method call overloading support. - </para> - </listitem> - </varlistentry> - </variablelist> - </sect2> - - <sect2 id="install.configure.networking"> - <title>Networking</title> - - <variablelist> - <varlistentry id="install.configure.with-curl"> - <term> - <parameter>--with-curl[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Include CURL support - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.enable-ftp"> - <term> - <parameter>--enable-ftp</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available; use <link - linkend="install.configure.with-ftp">--with-ftp</link> - instead. - </para> - <para> - PHP 4: Enable FTP support - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-ftp"> - <term> - <parameter>--with-ftp</parameter> - </term> - <listitem> - <para> - PHP 3: Include FTP support. - </para> - <para> - PHP 4: Option not available; use <link - linkend="install.configure.enable-ftp">--enable-ftp</link> - instead - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.disable-url-fopen-wrapper"> - <term> - <parameter>--disable-url-fopen-wrapper</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Disable the URL-aware fopen wrapper that allows accessing - files via http or ftp. - </para> - <warning> - <para> - This switch is only available for PHP versions up to 4.0.3, newer - versions provide an INI parameter called - <parameter>allow_url_fopen</parameter> instead of forcing you to - decide upon this feature at compile time. - </para> - </warning> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-mod-dav"> - <term> - <parameter>--with-mod-dav=DIR</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Include DAV support through Apache's mod_dav, DIR is - mod_dav's installation directory (Apache module version only!) - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-openssl"> - <term> - <parameter>--with-openssl[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Include OpenSSL support in SNMP. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-snmp"> - <term> - <parameter>--with-snmp[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Include SNMP support. DIR is the SNMP base install - directory, defaults to searching through a number of common locations - for the snmp install. Set DIR to shared to build as a dl, or shared,DIR - to build as a dl and still specify DIR. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.enable-ucd-snmp-hack"> - <term> - <parameter>--enable-ucd-snmp-hack</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Enable UCD SNMP hack - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.enable-sockets"> - <term> - <parameter>--enable-sockets</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Enable sockets support - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-yaz"> - <term> - <parameter>--with-yaz[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Include YAZ support (ANSI/NISO Z39.50). DIR is the YAZ bin - install directory - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.enable-yp"> - <term> - <parameter>--enable-yp</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available; use <link - linkend="install.configure.with-yp">--with-yp</link> - instead. - </para> - <para> - PHP 4: Include YP support - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-yp"> - <term> - <parameter>--with-yp</parameter> - </term> - <listitem> - <para> - PHP 3: Include YP support - </para> - <para> - PHP 4: Option not available; use <link - linkend="install.configure.enable-yp">--enable-yp</link> - instead. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-mnogosearch"> - <term> - <parameter>--with-mnogosearch</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Include mnoGoSearch support. - </para> - </listitem> - </varlistentry> - </variablelist> - - </sect2> - - <sect2 id="install.configure.php"> - <title>PHP Behaviour</title> - - <variablelist> - <varlistentry id="install.configure.enable-magic-quotes"> - <term> - <parameter>--enable-magic-quotes</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Enable magic quotes by default. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.disable-short-tags"> - <term> - <parameter>--disable-short-tags</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Disable the short-form &lt;? start tag by default. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.enable-track-vars"> - <term> - <parameter>--enable-track-vars</parameter> - </term> - <listitem> - <para> - PHP 3: Enable GET/POST/Cookie track variables by default. - </para> - <para> - PHP 4: Option not available in PHP 4; as of PHP 4.0.2, - track_vars is always on. - </para> - </listitem> - </varlistentry> - </variablelist> - - </sect2> - - <sect2 id="install.configure.servers"> - <title>Server</title> - - <variablelist> - <varlistentry id="install.configure.with-aolserver-src"> - <term> - <parameter>--with-aolserver-src=DIR</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Specify path to the source distribution of AOLserver - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-aolserver"> - <term> - <parameter>--with-aolserver=DIR</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Specify path to the installed AOLserver - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-apache"> - <term> - <parameter>--with-apache[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Build Apache module. DIR is the top-level Apache build - directory, defaults to /usr/local/etc/httpd. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-apxs"> - <term> - <parameter>--with-apxs[=FILE]</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Build shared Apache module. FILE is the optional pathname - to the Apache apxs tool; defaults to apxs. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.enable-versioning"> - <term> - <parameter>--enable-versioning</parameter> - </term> - <listitem> - <para> - PHP 3: Take advantage of versioning and scoping Provided by Solaris 2.x - and Linux - </para> - <para> - PHP 4: Export only required symbols. See INSTALL for more information - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-caudium"> - <term> - <parameter>--with-caudium[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Build PHP as a Pike module for use with the Caudium - webserver. DIR is the Caudium base directory. If no directory - is specified $prefix/caudium/server is used. The prefix is - controlled by the --prefix option and is /usr/local per - default. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-fhttpd"> - <term> - <parameter>--with-fhttpd[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Build fhttpd module. DIR is the fhttpd sources directory, - defaults to /usr/local/src/fhttpd. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-nsapi"> - <term> - <parameter>--with-nsapi=DIR</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Specify path to the installed Netscape - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-phttpd"> - <term> - <parameter>--with-phttpd=DIR</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-pi3web"> - <term> - <parameter>--with-pi3web=DIR</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Build PHP as a module for use with Pi3Web. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-roxen"> - <term> - <parameter>--with-roxen=DIR</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Build PHP as a Pike module. DIR is the base Roxen directory, - normally /usr/local/roxen/server. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.enable-roxen-zts"> - <term> - <parameter>--enable-roxen-zts</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Build the Roxen module using Zend Thread Safety. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-thttpd"> - <term> - <parameter>--with-thttpd=SRCDIR</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-zeus"> - <term> - <parameter>--with-zeus=DIR</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Build PHP as an ISAPI module for use with Zeus. - </para> - </listitem> - </varlistentry> - </variablelist> - - </sect2> - - <sect2 id="install.configure.text"> - <title>Text and language</title> - - <variablelist> - <varlistentry id="install.configure.with-aspell"> - <term> - <parameter>--with-aspell[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Include ASPELL support. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-gettext"> - <term> - <parameter>--with-gettext[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4: Include GNU gettext support. DIR is the gettext install - directory, defaults to /usr/local - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-iconv"> - <term> - <parameter>--with-iconv[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Include iconv support. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-pspell"> - <term> - <parameter>--with-pspell[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Include PSPELL support. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-recode"> - <term> - <parameter>--with-recode[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Include GNU recode support. - </para> - <para> - PHP 4: Include recode support. DIR is the recode install directory. - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.enable-shmop"> - <term> - <parameter>--enable-shmop</parameter> - </term> - <listitem> - <para> - PHP 3, PHP 4 : Activate shmop support. - </para> - </listitem> - </varlistentry> - - </variablelist> - - </sect2> - - <sect2 id="install.configure.xml"> - <title>XML</title> - - <variablelist> - <varlistentry id="install.configure.with-dom"> - <term> - <parameter>--with-dom[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Include DOM support (requires libxml &gt;= 2.0). DIR is the - libxml install directory, defaults to <filename>/usr</filename> - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.enable-sablot-errors-descriptive"> - <term> - <parameter>--enable-sablot-errors-descriptive</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Enable Descriptive errors - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-sablot"> - <term> - <parameter>--with-sablot[=DIR]</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Include Sablotron support - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.enable-wddx"> - <term> - <parameter>--enable-wddx</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3 - </para> - <para> - PHP 4: Enable WDDX support - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.disable-xml"> - <term> - <parameter>--disable-xml</parameter> - </term> - <listitem> - <para> - PHP 3: Option not available in PHP 3; XML functionality is - not built in by default. Use <link - linkend="install.configure.with-xml">--with-xml</link> - to turn it on. - </para> - <para> - PHP 4: Disable XML support using bundled expat lib - </para> - </listitem> - </varlistentry> - - <varlistentry id="install.configure.with-xml"> - <term> - <parameter>--with-xml</parameter> - </term> - <listitem> - <para> - PHP 3: Include XML support - </para> - <para> - PHP 4: Option not available; XML support is built in by - default. Use <link - linkend="install.configure.disable-xml">--disable-xml</link> to - turn it off. - </para> - </listitem> - </varlistentry> - </variablelist> - </sect2> </sect1>
« previous php.doc (#969340442) next »