Contributions are ready for review

Hello PHP EN Documentation team, There are contributions within the online editor queue for this language. Please review, then commit or delete these patches. Patches for review : ----------------------- New file: en/install/unix/nginx.xml By: Jacob Clark on 2014-01-08 07:33:25 =================================================================== --- en/install/unix/nginx.xml +++ en/install/unix/nginx.xml @@ -0,0 +1,272 @@ +<?xml version="1.0" encoding="utf-8"?> + <sect1 xml:id="install.unix.nginx" xmlns="http://docbook.org/ns/docbook" xmlns:xlink="http://www.w3.org/1999/xlink"> + <title>Nginx 1.4.x on Unix systems</title> + + <para> + This documentation will cover installing and configuring PHP with PHP-FPM for a Nginx 1.4.x HTTP server. + </para> + + <para> + This guide will assume that you have built Nginx from source and therefore all binaries and configuration files are located at '/usr/local/nginx'. If this is not the case and you have obtained Nginx through other means then please refer to the <link xlink:href="&url.nginx;">Nginx Wiki</link> in order translate this manual to your setup. + </para> + + <para> + This guide will cover the basics of configuring an Nginx server to + process PHP applications and serve them on port 80, it is recommended + that you study the Nginx and PHP-FPM documentation if you wish to + optimise your setup past the scope of this documentation. + </para> + + <para> + Please note that throughout this documentation version numbers have been + replaced with an 'x' to ensure this documentation stays correct in the future, + please replace these as necessary with the corresponding version numbers. + </para> + + <orderedlist> + <listitem> + <para> + It is recomended that you visit the Nginx Wiki + <link xlink:href="&url.nginx.wiki.install;">install</link> page + in order to obtain and install Nginx on your system. + </para> + </listitem> + + <listitem> + <para> + Obtain and unpack the PHP source: + </para> + + <example xml:id="install.unix.nginx.extract.php"> + <screen> +<![CDATA[ +tar zxf php-x.x.x +]]> + </screen> + </example> + </listitem> + + <listitem> + <para> + Configure and build PHP. This is where you customize PHP + with various options, like which extensions will be enabled. Run + ./configure --help for a list of available options. In our example + we'll do a simple configure with PHP-FPM and MySQL support. + </para> + + <example xml:id="install.unix.nginx.build.php"> + <screen> +<![CDATA[ +cd ../php-x.x.x +./configure --enable-fpm --with-mysql +make +sudo make install +]]> + </screen> + </example> + </listitem> + + <listitem> + <para> + Obtain and move configuration files to their correct locations + </para> + + <example xml:id="install.unix.nginx.configure.php"> + <screen> +<![CDATA[ +cp php.ini-development /usr/local/php/php.ini +cp /usr/local/etc/php-fpm.conf.default /usr/local/etc/php-fpm.conf +cp sapi/fpm/php-fpm /usr/local/bin +]]> + </screen> + </example> + </listitem> + + <listitem> + <para> + It is important that we prevent Nginx from passing requests to the PHP-FPM backend if the file does not exists, allowing us to prevent arbitrarily script injection. + + We can fix this by setting the option cgi.fix_pathinfo= to 0 within our php.ini file. + + Load up php.ini: + </para> + + <example xml:id="install.unix.nginx.configure.php"> + <screen> +<![CDATA[ +vim /usr/local/php/php.ini +]]> + </screen> + </example> + + <para> + Locate cgi.fix_pathinfo= and modify it as follows: + </para> + + <example xml:id="install.unix.nginx.configure.php"> + <screen> +<![CDATA[ +cgi.fix_pathinfo=0 +]]> + </screen> + </example> + </listitem> + + <listitem> + <para> + php-fpm.conf must be modified to specify that php-fpm must run as the user www-data and the group www-data before we can start the service: + </para> + + <example xml:id="install.unix.nginx.modify.phpfpm"> + <screen> +<![CDATA[ +vim /usr/local/etc/php-fpm.conf +]]> + </screen> + </example> + + <para> + Find and modify the following: + </para> + + <example xml:id="install.unix.nginx.modify.phpfpm.usergroup"> + <screen> +<![CDATA[ +; Unix user/group of processes +; Note: The user is mandatory. If the group is not set, the default user's group +; will be used. +user = www-data +group = www-data +]]> + </screen> + </example> + + <para> + The php-fpm service can now be started: + </para> + + <example xml:id="install.unix.nginx.start.phpfpm"> + <screen> +<![CDATA[ +/usr/local/bin/php-fpm +]]> + </screen> + </example> + + <para> + This guide will not configure php-fpm any further, if you are interested in further configuring php-fpm then please consult the documentation. + </para> + </listitem> + + + + <listitem> + <para> + Nginx must now be configured to support the processing of PHP applications: + </para> + + <example xml:id="install.unix.nginx.configure.nginx"> + <programlisting> +<![CDATA[ +vim /usr/local/nginx/conf/nginx.conf +]]> + </programlisting> + </example> + + <para> + Modify the default location block to be aware it must attempt to serve .php files: + </para> + + <example xml:id="install.unix.nginx.configure.nginx.location"> + <programlisting role="nginx-conf"> +<![CDATA[ +location / { +root html; +index index.php index.html index.htm; +} +]]> + </programlisting> + </example> + + <para> + The next step is to ensure that .php files are passed to the PHP-FPM backend, blow the commented default PHP location block, enter the following: + </para> + + <example xml:id="install.unix.nginx.configure.nginx.php"> + <programlisting role="nginx-conf"> +<![CDATA[ +location ~* .php$ { +fastcgi_index index.php; +fastcgi_pass 127.0.0.1:9000; +include fastcgi_params; +fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; +fastcgi_param SCRIPT_NAME $fastcgi_script_name; +} +]]> + </programlisting> + </example> + + <para> + Restart Nginx. + </para> + + <example xml:id="install.unix.nginx.restart.nginx"> + <screen> +<![CDATA[ +sudo /usr/local/nginx/sbin/nginx -s stop +sudo /usr/local/nginx/sbin/nginx +]]> + </screen> + </example> + </listitem> + + <listitem> + <para> + Create a test file + </para> + + <example xml:id="install.unix.nginx.test.nginx.php"> + <screen> +<![CDATA[ +rm /usr/local/nginx/html/index.html +echo "<?php phpinfo(); ?>" >> /usr/local/nginx/html/index.php +]]> + </screen> + </example> + + <para> + Now navigate to http://localhost. The phpinfo() should now be shown. + </para> + </listitem> + </orderedlist> + + <para> + Following the steps above you will have a running Nginx web server with + support for PHP as a <literal>SAPI</literal> module. Of course there are + many more configuration options available Apache and PHP. For more + information type <command>./configure --help</command> in the corresponding + source tree. + </para> + + </sect1> + + <!-- Keep this comment at the end of the file + Local variables: + mode: sgml + sgml-omittag:t + sgml-shorttag:t + sgml-minimize-attributes:nil + sgml-always-quote-attributes:t + sgml-indent-step:1 + sgml-indent-data:t + indent-tabs-mode:nil + sgml-parent-document:nil + sgml-default-dtd-file:"~/.phpdoc/manual.ced" + sgml-exposed-tags:nil + sgml-local-catalogs:nil + sgml-local-ecat-files:nil + End: + vim600: syn=xml fen fdm=syntax fdl=2 si + vim: et tw=78 syn=sgml + vi: ts=1 sw=1 + --> => Put this change into your patches : https://edit.php.net/?project=php&action=putIntoMyPatches&idDB=51828 => Delete this change: https://edit.php.net/?project=php&action=deleteThisChange&idDB=51828 ------------------------------------------------------------------ New file: en/install/cloud/rackspace.xml By: Jamie Hannaford on 2014-01-22 21:17:46 =================================================================== --- en/install/cloud/rackspace.xml +++ en/install/cloud/rackspace.xml @@ -0,0 +1,32 @@ +<?xml version="1.0" encoding="utf-8"?> +<!-- $Revision: 312448 $ --> +<sect1 xml:id="install.cloud.rackspace" xmlns="http://docbook.org/ns/docbook" xmlns:xlink="http://www.w3.org/1999/xlink"> + <title>Rackspace Cloud</title> + <para> + PHP installs on the <link xlink:href="&url.cloud.rackspace;">Rackspace cloud platform</link>. + </para> + <para> + See also the <link xlink:href="&url.cloud.rackspace.sdk;">Rackspace SDK for PHP</link>. + </para> +</sect1> + +<!-- Keep this comment at the end of the file +Local variables: +mode: sgml +sgml-omittag:t +sgml-shorttag:t +sgml-minimize-attributes:nil +sgml-always-quote-attributes:t +sgml-indent-step:1 +sgml-indent-data:t +indent-tabs-mode:nil +sgml-parent-document:nil +sgml-default-dtd-file:"~/.phpdoc/manual.ced" +sgml-exposed-tags:nil +sgml-local-catalogs:nil +sgml-local-ecat-files:nil +End: +vim600: syn=xml fen fdm=syntax fdl=2 si +vim: et tw=78 syn=sgml +vi: ts=1 sw=1 +--> => Put this change into your patches : https://edit.php.net/?project=php&action=putIntoMyPatches&idDB=52319 => Delete this change: https://edit.php.net/?project=php&action=deleteThisChange&idDB=52319 ------------------------------------------------------------------ Modified: en/reference/pdf/book.xml By: rjs on 2014-01-23 06:39:46 =================================================================== --- en/reference/pdf/book.xml +++ en/reference/pdf/book.xml @@ -8,72 +8,19 @@ <preface xml:id="intro.pdf"> &reftitle.intro; <para> - The PDF functions in PHP can create PDF files using the PDFlib - library which was initially created by Thomas Merz and is now - maintained by <link xlink:href="&url.pdf;">PDFlib GmbH</link>. + The PDF functions in PHP can create PDF files using the PDFlib + library from PDFlib GmbH (<link xlink:href="&url.pdf;">www.pdflib.com</link>). + A restricted version called PDFlib Lite 7 is available for free, + but it is no longer maintained since 2010. + PDFlib integration for PHP is still actively maintained by PDFlib GmbH. + It is mainly targeted at the commercial PDFlib versions, but can also + be used for the old PDFlib Lite. </para> <para> - The documentation in this section is only meant to be an overview - of the available functions in the PDFlib library and should not be - considered an exhaustive reference. For the full and detailed - explanation of each function, consult the PDFlib Reference Manual - which is included in all PDFlib packages distributed by PDFlib GmbH. - It provides a very good overview of what PDFlib is capable of doing - and contains the most up-to-date documentation of all functions. - </para> - <para> - For a jump start we urge you to take a look at the programming samples - which are contained in all PDFlib distribution packages. These samples - demonstrate basic text, vector, and graphics output as well as - higher-level functions, such as the PDF import facility (PDI). - </para> - <para> - All of the functions in PDFlib and the PHP module have identical - function names and parameters. Unless configured otherwise, all - lengths and coordinates are measured in PostScript points. There are - generally 72 PostScript points to an inch, but this depends on the - output resolution. Please see the PDFlib Reference Manual - included in the PDFlib distribution for a more thorough explanation - of the coordinate system used. - </para> - <para> - With version 6, PDFlib offers an object-oriented API for PHP 5 in - addition to the function-oriented API for PHP 4. The main difference is - the following: - </para> - <para> - In PHP 4, first a PDF resource has to be retrieved with a function call - like - </para> - <para> - $p = PDF_new(). - </para> - <para> - This PDF resource is used as the first parameter in all further function - calls, such as in - </para> - <para> - PDF_begin_document($p, "", ""). - </para> - <para> - In PHP 5 however, a PDFlib object is created with - </para> - <para> - $p = new PDFlib(). - </para> - <para> - This object offers all PDFlib API functions as methods, e.g. as with - </para> - <para> - $p->begin_document("", ""). - </para> - <para> - In addition, exceptions have been introduced in PHP 5 which are - supported by PDFlib 6 and later as well. - </para> - <para> - Please see the <link linkend="pdf.examples">examples</link> below for - more information. + If you want to use PDFlib we urge you start with the examples which are + included in all PDFlib packages, and refer to the extensive manuals in + PDF format which are also included. At a minimum you should take a look + at the hello.php sample to learn basic setup for PDFlib usage. </para> <note> <para> => Put this change into your patches : https://edit.php.net/?project=php&action=putIntoMyPatches&idDB=52335 => Delete this change: https://edit.php.net/?project=php&action=deleteThisChange&idDB=52335 ------------------------------------------------------------------ -- https://edit.php.net/ This email is send automatically by the Php Docbook Online Editor.