RE: [PHP] Re: ODBC

Hi Scott, Thanks for the feedback. I think all the issues you experienced are resolved in our drivers, and we now have a TDS as well as a Multi-Tier SQLServer 2000 driver, so the data types should not be an issue. The IP address bit is indeed due to a need to restart our server components in Multi-Tier if you have bound them to a specific interface. If you need this flexibility of IP address changing, you can use our Single-Tier (client only) drivers. Hope this helps, and I'll stop the off-topic post now :) Best regards, Andrew Hill Director of Technology Evangelism OpenLink Software http://www.openlinksw.com Universal Data Access & Virtuoso Universal Server -----Original Message----- From: Scott Fletcher [mailto:scott@abcoa.com] Sent: Wednesday, August 07, 2002 9:41 AM To: php-general@lists.php.net Subject: Re: [PHP] Re: ODBC Hi Andrew! One quick correction! I did have success with it for a year and a half! It just cause more problem than what it should be. The tech support at OpenLink have been very helpful and I like that. But this wasn't the reason I decide to let go of the OpenLink. There are a few things here! 1) Data type conversion between PHP and MS-SQL through OpenLink is a bit different. The biggest fault lie with MS-SQL on this one. I guess it must have to do with the competition reason, doesn't MS love to squash the non-MS softwares. A helpful solution but not a very effective solution was to have the MS ODBC driver set up on the MS-SQL Server where the Unix sever using OpenLINK then point to MS ODBC driver then MS ODBC point to the MS-SQL Server. 2) We have internet network IP address changes a couple of time due to my company moving to a different location and later with the ISP change and later with a new firewall. When it become so long, I forget that MS SQL server on Win2000 would have to be rebooted because Win2000 doesn't actually change the IP address from the bottom up. I end up spending a few days troubleshooting the problem because OpenLink could not communicate with MS-SQL Server. I'm kind of surprised that the OpenLink software on Win2000 didn't get that message. 3) We have a knowledge base and we noticed one problem with it! The problem if there is a very long comments in just one row, one field, the database, MS-SQL can show it all but OpenLink won't show it all, so the comments end up being cropped off at the end. I get lot of complaining from the customers as well as the staffs. As result of keeping in touch with the OpenLINK tech support, they told me that OpenLINK design the software to be a little bit more strict in handling the data. So, it was an internal matter at OpenLINK. I had to make a decision because my company will move in a year and soon, the machine will go offsite. I just can not handle it anymore so I junked it and move the website to Windows. Yea, we had to buy a window machine for that. The problem is some people where want Windows and some other want UNIX or Linux. Can't have it both way. The bad thing is the staff do not wish to have the webserver installed on the MS-SQL server. So, I just can not handled it anymore because it is taking my time away from projects I'm working on. It is nothing personal. Just that compactibility difference is more trouble than what it's worth. Scott "Andrew Hill" <ahill@openlinksw.com> wrote in message news:030001c23e18$81aad930$eb0ba8c0@usnet.private... > Hi Scott, > > I'm sorry to hear you experienced problems with this architecture. > Free support is always available for OpenLink products at > http://www.openlinksw.com/support/suppindx.htm. > > I am also extremely surprised that you worked on this for a year and a > half without success. Our ODBC agent in our Multi-Tier driver works > exceptionally well for this situation, and any OpenLink support person > as well as many people on this list could have provide quick assistance. > > > If you do require any help in configuring drivers with PHP, please don't > hesitate to ask. > > Best regards, > Andrew Hill > Director of Technology Evangelism > OpenLink Software http://www.openlinksw.com > Universal Data Access & Virtuoso Universal Server > > -----Original Message----- > From: Scott Fletcher [mailto:scott@abcoa.com] > Sent: Friday, August 02, 2002 3:25 PM > To: php-general@lists.php.net > Subject: [PHP] Re: ODBC > > Yes! Unfortunately, you'll have to install the special driver on the > Linux/Unix becuase of the communication difference between UNIX & > Windows as > well as the language difference between these two. I tried using iODBC > and > openLINK. After 1 1/2 years, I decided that open source code for this > is no > good because they are not compactable and it is such a big, big pain in > the > butt!!! So, I ended up moving the website on UNIX to windows. Why, > because > of the way the data type is being coverted between 2 platform and > character > length or type is strictly limited. I have not tried to buy such a $600 > or > $800 driver software to see how well it does because it is a waste of > money > and MS kept changing the programming in the MS Access and MS SQL making > the > drivers useless. > > "Ashley M. Kirchner" <ashley@pcraft.com> wrote in message > news:3D4AD0B1.ABEE0A22@pcraft.com... > > > > Can PHP be used on an Apache server (linux) to connect to a > (remote) > MS > > Access server (NT) through ODBC? If so, does anyone have examples of > how > this > > is done? And if not, what other choices do I have? > > > > -- > > W | I haven't lost my mind; it's backed up on tape somewhere. > > > +-------------------------------------------------------------------- > > Ashley M. Kirchner <mailto:ashley@pcraft.com> . > > 303.442.6410 > x130 > > IT Director / SysAdmin / WebSmith . 800.441.3873 > x130 > > Photo Craft Laboratories, Inc. . 3550 Arapahoe Ave. > #6 > > http://www.pcraft.com ..... . . . Boulder, CO > > 80303, > U.S.A. > > > > > > > > > > -- > PHP General Mailing List (http://www.php.net/) > To unsubscribe, visit: http://www.php.net/unsub.php > > -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php