Re: [INTERNALS-WIN] Re: php_yaz php5.3.5 windows

On 22 March 2011 20:10, Michael Ridinger <infohiodev@gmail.com> wrote: > I had the yaz4.dll file in the path already, but the dialogue did display > some errors that told me what was up ... > > PHP Startup:  yaz:  Unable to initialize module > Module compiled with Build ID=API20090626,TS,VC9 > PHP compiled with build ID=API20090626,NTS,VC9 > > As you can see, I need to build the extension as non-thread-safe which I'm > not sure how to do.  I tried configuring the make with --disable-zts but > that didn't work.  Very close now. > > Thank you! > > Mike > > On Tue, Mar 22, 2011 at 10:59 AM, Richard Quadling <rquadling@gmail.com> > wrote: >> >> On 22 March 2011 14:07, Michael Ridinger <infohiodev@gmail.com> wrote: >> > Thank you for that explanation.  I did figure out the development files >> > were >> > missing and included the where they needed to be. >> > >> > I've been able to successfully build php_yaz.dll (thank you!!!) but it >> > doesn't work yet.  I enable it in PHP but in the error log it says it >> > cannot >> > load the php_yaz dll file because it cannot find the specified module. >> >  Not >> > sure what that means, but I am closer.  I'm unsure which module it's >> > refering to as the php_yaz module is present.  If I remove it entirely, >> > I >> > get a different error, so it's not the location of php_yaz.dll itself, >> > but >> > of something else. >> > >> > Thanks again >> > >> > Mike >> > >> > On Tue, Mar 22, 2011 at 6:53 AM, Richard Quadling >> > <rquadling@gmail.com>wrote: >> > >> >>  On 22 March 2011 04:24, Michael Ridinger <infohiodev@gmail.com> wrote: >> >> > When I attempt to do a configure --with-yaz, I get the following >> >> > error: >> >> > >> >> > Checking for yaz/yaz-version.h ...  <not found> >> >> > Checking for yaz/yaz-version.h ...  <not found> >> >> > WARNING: yaz not enabled; libraries and headers not found >> >> > >> >> > I have the yaz pecl extension downloaded and in the correct spot. >> >> >  When I >> >> do >> >> > a configure --help I see the option to use --with-yaz but it's asking >> >> > for >> >> > header files. >> >> > >> >> > I checked the yaz.dsp script and found it does reference header files >> >> > but >> >> > I've not found them anywhere.  Anyone know what is going on? >> >> > >> >> > Thanks for the help. >> >> > >> >> > Mike >> >> > >> >> > On Mon, Mar 21, 2011 at 8:04 PM, Richard Quadling >> >> > <rquadling@gmail.com >> >> >wrote: >> >> > >> >> >>  On 21 March 2011 19:26, Michael Ridinger <infohiodev@gmail.com> >> >> >> wrote: >> >> >> > Thank you!  So, my next big question is ... >> >> >> > >> >> >> > After I've done the nmake and the build is complete, >> >> >> > where's the >> >> build? >> >> >>  Is >> >> >> > a .dll created somewhere?  So far, I dont see one. >> >> >> > >> >> >> > I have found a "Release" directory that appears to have >> >> >> > the build >> >> >> > in >> >> it, >> >> >> but >> >> >> > it doesn't have a YAZ ext listed.  Could it still be >> >> >> > yaz-enabled? >> >> >> > >> >> >> > Things are so much easier on Linux. >> >> >> > >> >> >> > Thanks >> >> >> > >> >> >> > Mike >> >> >> > >> >> >> > On Mon, Mar 21, 2011 at 10:25 AM, Richard Quadling < >> >> rquadling@gmail.com >> >> >> >wrote: >> >> >> > >> >> >> >>  On 21 March 2011 13:32, Michael Ridinger >> >> >> >> <infohiodev@gmail.com> >> >> wrote: >> >> >> >> > One thing I'm confused about is the compiling process >> >> >> >> > itself. >> >> >> >> > >> >> >> >> > I can compile PHP successfully but I'm not sure how to >> >> >> >> > compile >> >> >> >> > a >> >> PECL >> >> >> >> > package.  I just don't understand how to do that? >> >> >> >> >  I've read >> >> literally >> >> >> >> > dozens of tutorials on how to setup the environment to >> >> >> >> > compile >> >> >> >> > PHP, >> >> >> which >> >> >> >> > I've done successfully, but then they stop short ot >> >> >> >> > describing >> >> >> >> > how >> >> to >> >> >> >> > compile a PECL package. >> >> >> >> > >> >> >> >> > Can it be compiled into PHP 5.3.5 or can it be compiled >> >> >> >> > into a >> >> >> >> > DLL >> >> I >> >> >> can >> >> >> >> use >> >> >> >> > for an extension or can both be done?  I'm just not >> >> >> >> > real >> >> >> >> > familiar >> >> with >> >> >> >> doing >> >> >> >> > these types of things.  I don't even know how the >> >> >> >> > file >> >> >> >> > structure >> >> >> should >> >> >> >> be >> >> >> >> > setup.  And, it gets even more frustrating when I download >> >> >> >> > the >> >> win32 >> >> >> PECL >> >> >> >> > packages and find that YAZ isnt there so I have to get it >> >> >> >> > with >> >> >> >> > CSV. >> >> >>  I'm >> >> >> >> > just missing some key pieces. >> >> >> >> > >> >> >> >> > I appreciate any way you can help. >> >> >> >> > >> >> >> >> > Mike >> >> >> >> > >> >> >> >> > On Sun, Mar 20, 2011 at 4:56 PM, Michael Ridinger < >> >> >> infohiodev@gmail.com >> >> >> >> >wrote: >> >> >> >> > >> >> >> >> >> I've been using php_yaz for a long time with PHP >> >> >> >> >> 5.1 and 5.2.. >> >>  I've >> >> >> had >> >> >> >> to >> >> >> >> >> setup a new server for another reason and am now using >> >> >> >> >> Windows >> >> 2008R2 >> >> >> >> and >> >> >> >> >> PHP5.2.17 or PHP5.3.5 with IIS7 and am having >> >> >> >> >> absolutely no >> >> >> >> >> luch >> >> >> getting >> >> >> >> the >> >> >> >> >> php_yaz package to build.  In fact, I can't get >> >> >> >> >> any package to >> >> build. >> >> >>  I >> >> >> >> can >> >> >> >> >> build PHP, but not any PECL packages and am totally >> >> >> >> >> stumped. >> >> >> >> >>  I >> >> tried >> >> >> >> >> following directions/docs everywhere I could find them >> >> >> >> >> and >> >> >> >> >> still >> >> have >> >> >> >> not >> >> >> >> >> been able to build this extension. >> >> >> >> >> >> >> >> >> >> In the past, I've been able to download the >> >> >> >> >> extension and use >> >> >> >> >> it >> >> but >> >> >> >> it's >> >> >> >> >> not part of the PHP distribution and PECL doesn't >> >> >> >> >> have it as a >> >> >> binary... >> >> >> >> so, >> >> >> >> >> I have to the building myself. >> >> >> >> >> >> >> >> >> >> Anyone know how to do this effectively?  This is very >> >> >> >> >> important to >> >> >> me. >> >> >> >>  I >> >> >> >> >> need php_yaz for Windows2008 and from what I've >> >> >> >> >> read, I need >> >> >> >> >> to >> >> >> compile >> >> >> >> it >> >> >> >> >> using VC9, which I did.  The one issue that's >> >> >> >> >> really threw me >> >> >> >> >> is >> >> that >> >> >> >> >> PHP5.3.5 doesn't run as an ISAPI module but with >> >> >> >> >> fast-cgi. >> >> >> >> >>  That >> >> >> makes >> >> >> >> the >> >> >> >> >> package a little funky to deal with as it requires >> >> >> >> >> PHP5ts.dll, >> >> which >> >> >> >> isn't >> >> >> >> >> part of PHP5.3.5 or PHP5.2.17. >> >> >> >> >> >> >> >> >> >> Obviously I'm a novice at building such things... >> >> >> >> >> I'm a >> >> >> >> >> developer, >> >> >> but >> >> >> >> not >> >> >> >> >> a package builder.  Can anyone help or show me how to >> >> >> >> >> do this >> >> >> >> >> ... >> >> or >> >> >> at >> >> >> >> the >> >> >> >> >> very least point me in the right direction? >> >> >> >> >> >> >> >> >> >> Thank you >> >> >> >> >> >> >> >> >> >> Mike >> >> >> >> >> >> >> >> >> > >> >> >> >> >> >> >> >> Create a directory that is parallel to your php code. >> >> >> >> >> >> >> >> I have >> >> >> >> >> >> >> >> L:\BuildPHP\php53dev\vc9\x86 >> >> >> >>  deps >> >> >> >>  Patches >> >> >> >>  pecl >> >> >> >>  PHP_5_3 >> >> >> >> >> >> >> >> In pecl, create a directory for the extension. It will need to >> >> contain >> >> >> >> the code from trunk, the branch or the tag that you want to >> >> >> >> compile. >> >> >> >> >> >> >> >> e.g. >> >> >> >> >> >> >> >> L:\BuildPHP\php53dev\vc9\x86\pecl\yaz\tests >> >> >> >> L:\BuildPHP\php53dev\vc9\x86\pecl\yaz\CREDITS >> >> >> >> L:\BuildPHP\php53dev\vc9\x86\pecl\yaz\README >> >> >> >> L:\BuildPHP\php53dev\vc9\x86\pecl\yaz\php_yaz.c >> >> >> >> L:\BuildPHP\php53dev\vc9\x86\pecl\yaz\yaz.dsp >> >> >> >> L:\BuildPHP\php53dev\vc9\x86\pecl\yaz\php_yaz.h >> >> >> >> L:\BuildPHP\php53dev\vc9\x86\pecl\yaz\config.m4 >> >> >> >> L:\BuildPHP\php53dev\vc9\x86\pecl\yaz\config.w32 >> >> >> >> L:\BuildPHP\php53dev\vc9\x86\pecl\yaz\package.xml >> >> >> >> etc. >> >> >> >> >> >> >> >> When you run buildconf, the configuration of the extensions in >> >> >> >> pecl >> >> >> >> will be found. >> >> >> >> >> >> >> >> You can then include/exclude them via the configure.js script. >> >> >> >> >> >> >> >> If you run ... >> >> >> >> >> >> >> >> configure --help >> >> >> >> >> >> >> >> you'll see (for yaz) ... >> >> >> >> >> >> >> >>  --with-yaz                        YAZ support >> >> >> >> (ANSI/NISO Z39.50) >> >> >> >> >> >> >> >> So, you can now say ... >> >> >> >> >> >> >> >> configure --with-yaz=shared >> >> >> >> >> >> >> >> (for example - missing out a lot of other options). >> >> >> >> >> >> >> >> And when you then run nmake, you'll get yaz compiled. >> >> >> >> >> >> >> >> I've not tried it (as I'm a bit slow on these things), >> >> >> >> but there >> >> >> >> is a >> >> >> >> mechanism called phpize which I think it a process to compile a >> >> >> >> PHP >> >> >> >> extension without the need to do a full build of PHP. >> >> >> >> >> >> >> >> Richard. >> >> >> >> >> >> >> >> -- >> >> >> >> Richard Quadling >> >> >> >> Twitter : EE : Zend >> >> >> >> @RQuadling : e-e.com/M_248814.html : bit.ly/9O8vFY >> >> >> >> >> >> >> > >> >> >> >> >> >> I'm at home at the moment and don't have a build environment >> >> >> for >> >> >> PHP. >> >> >> >> >> >> But, I run nmake install to create a usable installation of php in >> >> c:\php >> >> >> >> >> >> I think the extension is available in Release\pecl\yaz. >> >> >> >> >> >> Typing ... >> >> >> >> >> >> dir php_yaz.dll /s /b >> >> >> >> >> >> should help you find the extension very quickly. >> >> >> >> >> >> >> >> >> >> >> >> From a unix perspective ... I've no idea. I was of the understanding >> >> >> that the process was the same... >> >> >> >> >> >> buildconf >> >> >> configure xxxxxx >> >> >> nmake >> >> >> >> >> >> (more or less). >> >> >> >> The pecl extensions are, in the main, just a glue/layer between PHP >> >> and the corresponding library. PHP is NOT responsible for maintaining >> >> Yaz, just the php <-> yaz extension. >> >> >> >> To get the extension compilable from source, you need to include >> >> appropriate header files from the yaz project (nothing to do with >> >> PHP). >> >> >> >> I got mine from >> >> http://ftp.indexdata.dk/pub/yaz/win32/. I'd used the >> >> 4.1.2, but I see that this is now upgraded to 4.1.7. >> >> >> >> Download the package you want and install it. You'll need to make sure >> >> you install the YAZ Development element as this contains the headers >> >> and library files required by PHP to build the php_yaz extension. >> >> Again, just to be clear, PHP is not going to be compiling/building >> >> YAZ. You install that as normal. PHP is only building the php_yaz >> >> extension which requires headers and libraries to be able to interact >> >> with the yaz application. >> >> >> >> Once you've installed Yaz, copy C:\Program Files\Yaz\include and >> >> C:\Program Files\Yaz\lib to the deps directory (Mine is on a different >> >> server L:\BuildPHP\php53dev\vc9\x86\deps). >> >> >> >> Now, you run ... >> >> >> >> buildconf >> >> config.nice >> >> nmake >> >> >> >> >> >> config.nice is just a shortcut to all the configure options you last >> >> used (except when using configure --help). It saves you having to type >> >> configure --abc --def --xyz every time you want to run configure. >> >> >> >> See how you get on with this. >> >> >> >> >> >> >> >> Richard. >> >> >> >> >> >> -- >> >> Richard Quadling >> >> Twitter : EE : Zend >> >> @RQuadling : e-e.com/M_248814.html : bit.ly/9O8vFY >> >> >> > >> >> He he. >> >> Getting there... >> >> OK. So now that we have built php_yaz.dll, do you remember that I said >> that php_yaz.dll is the glue between PHP and YAZ? >> >> One of the dependencies of php_yaz.dll is the actual yaz runtime >> library (yaz4.dll). >> >> The fact that PHP (via php_yaz.dll) isn't finding the library suggests >> that C:\Program Files\YAZ\bin isn't in the path. >> >> If you try ... >> >> php -ddisplay_startup_errors=1 -m >> >> You should see 2 dialogues. The first is the important one and >> reflects the comments I've just made. >> >> "The application has failed to start because yaz4.dll was not found. >> Re-installing the application may fix the problem." >> >> Actually, re-installing won't make any difference. Instead add >> C:\Program Files\YAZ\bin to your path. >> >> SET PATH=%PATH%;C:\Program Files\YAZ\bin >> PHP -ddisplay_startup_errors=1 -dextension=php_yaz.dll -m >> >> and I get output of ... >> >> [PHP Modules] >> bcmath >> calendar >> com_dotnet >> Core >> ctype >> curl >> date >> dom >> ereg >> filter >> ftp >> hash >> iconv >> json >> libxml >> mcrypt >> mhash >> mysqlnd >> odbc >> openssl >> pcre >> PDO >> pdo_mysql >> Phar >> Reflection >> session >> SimpleXML >> SPL >> standard >> tokenizer >> wddx >> xml >> xmlreader >> xmlwriter >> yaz >> zip >> zlib >> >> If you need notes on how to add a directory to the PATH, please take a >> look at >> >> http://uk.php.net/manual/en/faq.installation.php#faq.installation.addtopath, >> substituting C:\PHP for C:\Program Files\YAZ\bin >> >> Regards, >> >> Richard. >> >> -- >> Richard Quadling >> Twitter : EE : Zend >> @RQuadling : e-e.com/M_248814.html : bit.ly/9O8vFY > > What error did you get for the --disable-zts build? Here is my config.nice.bat file ... cscript /nologo configure.js "--disable-zts" "--with-prefix=C:\PHP5" "--enable-cli-win32" "--enable-crt-debug" "--enable-debug-pack" "--enable-lzf-better-compression=yes" "--enable-bbcode=shared" "--enable-exif=shared" "--enable-fileinfo=shared" "--enable-igbinary=shared" "--enable-inclued=shared" "--enable-intl=shared" "--enable-jarowinkler=shared" "--enable-lzf=shared" "--enable-mbstring=shared" "--enable-mschart=shared" "--enable-pdo=shared" "--enable-printer=shared" "--enable-rar=shared" "--enable-shmop=shared" "--enable-soap=shared" "--enable-sockets=shared" "--enable-spl_types=shared" "--enable-sqlsrv=shared" "--enable-timezonedb=shared" "--enable-win32service=shared" "--enable-wincache=shared" "--with-bz2=shared" "--with-curl=shared" "--with-gd=shared" "--with-gettext=shared" "--with-gmp=shared" "--with-imagick=shared" "--with-imap=shared" "--with-ldap=shared" "--with-mcrypt" "--with-mhash=shared" "--with-mp=auto" "--with-mysqli=shared" "--with-openssl" "--with-pdo-mysql=mysqlnd" "--with-pdo-odbc=shared" "--with-pdo-sqlite=shared" "--with-pdo-sqlsrv=shared" "--with-snmp=shared" "--with-sqlite=shared" "--with-sqlite3=shared" "--with-tidy=shared" "--with-xdebug=shared" "--with-xmlrpc=shared" "--with-xsl=shared" "--with-yaz=shared" "--without-t1lib" %* The output from config.nice.bat is ... cscript /nologo configure.js "--disable-zts" "--with-prefix=C:\PHP5" "--enable-cli-win32" "--enable-crt-debug" "--enable-debug-pack" "--enable-lzf-better-compression=yes" "--enable-bbcode=shared" "--enable-exif=shared" "--enable-fileinfo=shared" "--enable-igbinary=shared" "--enable-inclued=shared" "--enable-intl=shared" "--enable-jarowinkler=shared" "--enable-lzf=shared" "--enable-mbstring=shared" "--enable-mschart=shared" "--enable-pdo=shared" "--enable-printer=shared" "--enable-rar=shared" "--enable-shmop=shared" "--enable-soap=shared" "--enable-sockets=shared" "--enable-spl_types=shared" "--enable-sqlsrv=shared" "--enable-timezonedb=shared" "--enable-win32service=shared" "--enable-wincache=shared" "--with-bz2=shared" "--with-curl=shared" "--with-gd=shared" "--with-gettext=shared" "--with-gmp=shared" "--with-imagick=shared" "--with-imap=shared" "--with-ldap=shared" "--with-mcrypt" "--with-mhash=shared" "--with-mp=auto" "--with-mysqli=shared" "--with-openssl" "--with-pdo-mysql=mysqlnd" "--with-pdo-odbc=shared" "--with-pdo-sqlite=shared" "--with-pdo-sqlsrv=shared" "--with-snmp=shared" "--with-sqlite=shared" "--with-sqlite3=shared" "--with-tidy=shared" "--with-xdebug=shared" "--with-xmlrpc=shared" "--with-xsl=shared" "--with-yaz=shared" "--without-t1lib" Saving configure options to config.nice.bat Checking for cl.exe ... <in default path> Detected compiler MSVC9 (Visual C++ 2008) Detected 32-bit compiler Checking for link.exe ... C:\Program Files\Microsoft Visual Studio 9.0\VC\Bin Checking for nmake.exe ... <in default path> Checking for lib.exe ... <in default path> Checking for bison.exe ... <in default path> Checking for re2c.exe ... <in default path> Detected re2c version 0.13.5 Checking for zip.exe ... <in default path> Checking for lemon.exe ... <in default path> Checking for mc.exe ... C:\Program Files\Microsoft SDKs\Windows\v6.1\Bin Checking for mt.exe ... C:\Program Files\Microsoft SDKs\Windows\v6.1\Bin Build dir: Release PHP Core: php5.dll and php5.lib Checking for wspiapi.h ... <in default path> Enabling IPv6 support Enabling SAPI sapi\cgi Enabling SAPI sapi\cli Enabling SAPI sapi\cli Enabling extension ext\bcmath Checking for library libbz2_a.lib;libbz2.lib ... ..\deps\lib\libbz2_a.lib Checking for bzlib.h ... D:\BuildPHP\php53dev\vc9\x86\deps\include Enabling extension ext\bz2 [shared] Enabling extension ext\calendar Checking for library oleaut32.lib ... <in LIB path> OleAut32.Lib Enabling extension ext\com_dotnet Checking for mscoree.h ... <in default path> Enabling extension ext\ctype Checking for library libcurl_a.lib;libcurl.lib ... ..\deps\lib\libcurl_a.lib Checking for curl/easy.h ... D:\BuildPHP\php53dev\vc9\x86\deps\include Checking for library ssleay32.lib ... ..\deps\lib\ssleay32.lib Checking for library libeay32.lib ... ..\deps\lib\libeay32.lib Checking for library winmm.lib ... <in LIB path> WinMM.Lib Checking for library wldap32.lib ... <in LIB path> Wldap32.Lib Enabling extension ext\curl [shared] Enabling extension ext\date Enabling extension ext\ereg Checking for dirent.h ... D:\BuildPHP\php53dev\vc9\x86\deps\include Checking for library dirent_a.lib ... ..\deps\lib\dirent_a.lib Enabling extension ext\fileinfo [shared] Enabling extension ext\filter Enabling extension ext\ftp Checking for library libjpeg_a.lib;libjpeg.lib ... ..\deps\lib\libjpeg_a.lib Checking for library freetype_a.lib;freetype.lib ... ..\deps\lib\freetype_a..lib Checking for library libpng_a.lib;libpng.lib ... ..\deps\lib\libpng_a.lib Checking for gd.h ... ext\gd\libgd Checking for png.h ... D:\BuildPHP\php53dev\vc9\x86\deps\include\libpng12 Checking for library libiconv_a.lib;libiconv.lib ... ..\deps\lib\libiconv_a..lib Checking for iconv.h ... D:\BuildPHP\php53dev\vc9\x86\deps\include Checking for library User32.lib ... <in LIB path> User32.Lib Checking for library Gdi32.lib ... <in LIB path> Gdi32.Lib Enabling extension ext\gd [shared] Checking for library libintl_a.lib;libintl.lib ... ..\deps\lib\libintl_a.lib Checking for libintl.h ... D:\BuildPHP\php53dev\vc9\x86\deps\include Enabling extension ext\gettext [shared] Checking for library mpir_a.lib ... ..\deps\lib\mpir_a.lib Checking for gmp.h ... D:\BuildPHP\php53dev\vc9\x86\deps\include\mpir Enabling extension ext\gmp [shared] Enabling extension ext\hash Checking for library libiconv_a.lib ... ..\deps\lib\libiconv_a.lib Checking for iconv.h ... D:\BuildPHP\php53dev\vc9\x86\deps\include Enabling extension ext\iconv Checking for library cclient_a.lib;cclient.lib ... ..\deps\lib\cclient_a.lib Checking for c-client.h ... <not found> Checking for c-client.h ... <not found> Checking for c-client/c-client.h ... D:\BuildPHP\php53dev\vc9\x86\deps\include Checking for library winmm.lib ... <in LIB path> WinMM.Lib Checking for library ws2_32.lib ... <in LIB path> WS2_32.Lib Checking for library Secur32.lib ... <in LIB path> Secur32.Lib Checking for library crypt32.lib ... <in LIB path> Crypt32.Lib Enabling extension ext\imap [shared] AC_DEFINE[HAVE_NEW_MIME2TEXT]=1: is already defined to 1 Checking for library icuuc.lib ... ..\deps\lib\icuuc.lib Checking for unicode/utf.h ... D:\BuildPHP\php53dev\vc9\x86\deps\include Enabling extension ext\intl [shared] Enabling extension ext\json Checking for ldap.h ... D:\BuildPHP\php53dev\vc9\x86\deps\include\openldap Checking for lber.h ... D:\BuildPHP\php53dev\vc9\x86\deps\include\openldap Checking for library ssleay32.lib ... ..\deps\lib\ssleay32.lib Checking for library libeay32.lib ... ..\deps\lib\libeay32.lib Checking for library oldap32_a.lib ... ..\deps\lib\oldap32_a.lib Checking for library olber32_a.lib ... ..\deps\lib\olber32_a.lib Checking for library libsasl.lib ... <not found> Enabling extension ext\ldap [shared] Enabling extension ext\mbstring [shared] Checking for mcrypt.h ... D:\BuildPHP\php53dev\vc9\x86\deps\include Checking for library libmcrypt_a.lib;libmcrypt.lib ... ..\deps\lib\libmcrypt_a.lib Checking for library Advapi32.lib ... <in LIB path> AdvAPI32.Lib Enabling extension ext\mcrypt Checking for library ws2_32.lib ... <in LIB path> WS2_32.Lib Enabling extension ext\mysqlnd Checking for library odbc32.lib ... <in LIB path> odbc32.lib Checking for library odbccp32.lib ... <in LIB path> odbccp32.lib Checking for sql.h ... <in default path> Checking for sqlext.h ... <in default path> Enabling extension ext\odbc Checking for library ssleay32.lib ... ..\deps\lib\ssleay32.lib Checking for library libeay32.lib ... ..\deps\lib\libeay32.lib Checking for openssl/ssl.h ... D:\BuildPHP\php53dev\vc9\x86\deps\include Enabling extension ext\openssl Enabling extension ext\pcre Enabling extension ext\reflection Enabling extension ext\session Enabling extension ext\shmop [shared] Checking for snmp.h ... <in default path> Checking for library netsnmp.lib ... ..\deps\lib\netsnmp.lib Enabling extension ext\snmp [shared] Checking for library libeay32.lib ... ..\deps\lib\libeay32.lib Checking for library ws2_32.lib ... <in LIB path> WS2_32.Lib Checking for winsock.h ... <in default path> Enabling extension ext\sockets [shared] Enabling extension ext\spl Enabling extension ext\sqlite3 [shared] Checking for timelib_config.h ... ext/date/lib Enabling extension ext\standard Checking for library libtidy_a.lib;libtidy.lib ... ..\deps\lib\libtidy_a.lib Checking for tidy.h ... D:\BuildPHP\php53dev\vc9\x86\deps\include Enabling extension ext\tidy [shared] Enabling extension ext\tokenizer Checking for zlib.h ... D:\BuildPHP\php53dev\vc9\x86\deps\include Enabling extension ext\zip Checking for library zlib_a.lib;zlib.lib ... ..\deps\lib\zlib_a.lib Checking for zlib.h ... D:\BuildPHP\php53dev\vc9\x86\deps\include Enabling extension ext\zlib Enabling extension ..\pecl\bbcode [shared] Checking for wand/MagickWand.h ... D:\BuildPHP\php53dev\vc9\x86\deps\include Checking for library CORE_RL_wand_.lib ... ..\deps\lib\CORE_RL_wand_.lib Checking for library CORE_RL_magick_.lib ... ..\deps\lib\CORE_RL_magick_.lib Enabling extension ..\pecl\imagick [shared] Enabling extension ..\pecl\inclued [shared] Enabling extension ..\pecl\lzf [shared] Checking for library odbc32.lib ... <in LIB path> odbc32.lib Checking for .Net 2 ... C:\WINDOWS\Microsoft.net\Framework\v2.0.50727 Checking for .Net 4 ... C:\WINDOWS\Microsoft.net\Framework\v4.0.30319 Enabling extension ..\pecl\mschart [shared] Enabling extension ..\pecl\php_jarowinkler-0.1 [shared] Checking for library winspool.lib ... <in LIB path> WinSpool.Lib Checking for library gdi32.lib ... <in LIB path> Gdi32.Lib Enabling extension ..\pecl\printer [shared] Enabling extension ..\pecl\rar [shared] Checking for library odbc32.lib ... <in LIB path> odbc32.lib Checking for library odbccp32.lib ... <in LIB path> odbccp32.lib Checking for library version.lib ... <in LIB path> Version.Lib Checking for library psapi.lib ... <in LIB path> Psapi.Lib Enabling extension ..\pecl\sqlsrv [shared] Checking for sql.h ... <in default path> Checking for sqlext.h ... <in default path> Checking for sqlncli.h ... D:\BuildPHP\php53dev\vc9\x86\deps\include Checking for timelib_config.h ... ext/date/lib Enabling extension ..\pecl\timezonedb [shared] Enabling extension ..\pecl\win32service [shared] Enabling extension ..\pecl\wincache [shared] Enabling extension ..\pecl\xdebug [shared] Checking for yaz/yaz-version.h ... D:\BuildPHP\php53dev\vc9\x86\deps\include Checking for library yaz4.lib ... ..\deps\lib\yaz4.lib Enabling extension ..\pecl\yaz [shared] Checking for library libxml2_a_dll.lib;libxml2_a.lib ... ..\deps\lib\libxml2_a_dll.lib Checking for library libiconv_a.lib;iconv_a.lib;libiconv.lib;iconv.lib ... ..\deps\lib\libiconv_a.lib Checking for libxml/parser.h ... D:\BuildPHP\php53dev\vc9\x86\deps\include Enabling extension ext\libxml Enabling extension ext\dom Enabling extension ext\exif [shared] Enabling extension ext\mysqli [shared] mysqlnd build Enabling extension ext\pdo INFO: mysqlnd build Enabling extension ext\pdo_mysql Checking for library odbc32.lib ... <in LIB path> odbc32.lib Checking for library odbccp32.lib ... <in LIB path> odbccp32.lib Checking for sql.h ... <in default path> Checking for sqlext.h ... <in default path> Enabling extension ext\pdo_odbc [shared] Enabling extension ext\pdo_sqlite [shared] Enabling extension ext\phar Native OpenSSL support in Phar enabled Enabling extension ext\simplexml Enabling extension ext\soap [shared] Enabling extension ext\sqlite [shared] Enabling extension ext\wddx Checking for timelib_config.h ... ext/date/lib Enabling extension ext\xml Enabling extension ext\xmlreader Checking for xmlrpc.h ... ext\xmlrpc/libxmlrpc Checking for iconv.h ... D:\BuildPHP\php53dev\vc9\x86\deps\include Enabling extension ext\xmlrpc [shared] Checking for libxml/xmlwriter.h ... D:\BuildPHP\php53dev\vc9\x86\deps\include Enabling extension ext\xmlwriter Checking for library libxslt_a.lib ... ..\deps\lib\libxslt_a.lib Checking for library libexslt_a.lib ... ..\deps\lib\libexslt_a.lib Checking for libxslt\xslt.h ... D:\BuildPHP\php53dev\vc9\x86\deps\include Checking for libexslt\exslt.h ... D:\BuildPHP\php53dev\vc9\x86\deps\include Enabling extension ext\xsl [shared] Checking for apc_serializer.h ... <not found> Checking for apc_serializer.h ... <not found> Enabling extension ..\pecl\igbinary [shared] Checking for library odbc32.lib ... <in LIB path> odbc32.lib Checking for library odbccp32.lib ... <in LIB path> odbccp32.lib Checking for library version.lib ... <in LIB path> Version.Lib Checking for library psapi.lib ... <in LIB path> Psapi.Lib Enabling extension ..\pecl\pdo_sqlsrv [shared] Checking for sql.h ... <in default path> Checking for sqlext.h ... <in default path> Checking for sqlncli.h ... D:\BuildPHP\php53dev\vc9\x86\deps\include Enabling extension ..\pecl\spl_types [shared] Creating build dirs... Generating files... Generating Makefile Generating main/internal_functions.c [content unchanged; skipping] Generating main/config.w32.h Generating phpize Done. Enabled extensions: ------------------------- | Extension | Mode | ------------------------- | bbcode | shared | | bcmath | static | | bz2 | shared | | calendar | static | | com_dotnet | static | | ctype | static | | curl | shared | | date | static | | dom | static | | ereg | static | | exif | shared | | fileinfo | shared | | filter | static | | ftp | static | | gd | shared | | gettext | shared | | gmp | shared | | hash | static | | iconv | static | | igbinary | shared | | imagick | shared | | imap | shared | | inclued | shared | | intl | shared | | jarowinkler | shared | | json | static | | ldap | shared | | libxml | static | | lzf | shared | | mbstring | shared | | mcrypt | static | | mschart | shared | | mysqli | shared | | mysqlnd | static | | odbc | static | | openssl | static | | pcre | static | | pdo | static | | pdo_mysql | static | | pdo_odbc | shared | | pdo_sqlite | shared | | pdo_sqlsrv | shared | | phar | static | | printer | shared | | rar | shared | | reflection | static | | session | static | | shmop | shared | | simplexml | static | | snmp | shared | | soap | shared | | sockets | shared | | spl | static | | spl_types | shared | | sqlite | shared | | sqlite3 | shared | | sqlsrv | shared | | standard | static | | tidy | shared | | timezonedb | shared | | tokenizer | static | | wddx | static | | win32service | shared | | wincache | shared | | xdebug | shared | | xml | static | | xmlreader | static | | xmlrpc | shared | | xmlwriter | static | | xsl | shared | | yaz | shared | | zip | static | | zlib | static | ------------------------- Enabled SAPI: ------------- | Sapi Name | ------------- | cgi | | cli | | cli_win32 | ------------- ------------------------------------------- | | | ------------------------------------------- | Build type | Release | | Thread Safety | No | | Compiler | MSVC9 (Visual C++ 2008) | | Architecture | x86 | ------------------------------------------- Type 'nmake' to build PHP When you built PHP with the disable-zts, did you copy the DLL from Release? or from Release_TS? -- Richard Quadling Twitter : EE : Zend @RQuadling : e-e.com/M_248814.html : bit.ly/9O8vFY