Re: Can't get GD 1.8 to install right with PHP 4.0.3pl1

Do not add FreeType support to GD. Rebuild your GD library without Freetype support. PHP has its own code for combining Freetype and GD. Your GD makefile should have these lines: CFLAGS=-O2 -DHAVE_JPEG LIBS=-lm -lgd -ljpeg -lpng -lz Then use these flags for PHP: --with-gd=/some/path/gd-1.8.3 --with-jpeg-dir=/usr/local -Rasmus On Sun, 5 Nov 2000, Steve Lane wrote: > Hello, all: > > My inaugural question on this list -- not lightly asked, as I have worked on > this for three solid days and read every source of info I could find, have > even gotten down to read the PHP configure script, without much luck. > > All I'm trying to do is get gd to install with PHP. TrueType support looked > nice so I'm trying to get FreeType included as well. > > Platform is LinuxPPC, kernel 2.2.15pre3, gcc 2.95.2. PHP 4.0.3pl1. Gd 1.8.3 > > Here's what I did: > > 1) Built zlib, libpng, libjpeg and libttf (FreeType). Built them as shared > where possible. Built gd itself; uncommented lines in the Makefile to tell > gd about all the extra libraries: > > CFLAGS=-O -DHAVE_JPEG -DHAVE_LIBTTF > LIBS=-lm -lgd -lpng -lz -ljpeg -lttf > > Left the include and library directories alone. > > GD seemed to build fine. > > I end up with /usr/local/include like this: > > drwxrwxr-x 5 root root 4096 Nov 5 15:10 . > drwxr-xr-x 16 root root 4096 Nov 3 12:09 .. > drwxrwxr-x 2 root root 4096 Nov 5 14:20 X11 > drwxrwxr-x 2 root root 4096 Nov 5 15:00 freetype > -rw-r--r-- 1 root root 9326 Nov 5 15:10 gd.h > -rw-r--r-- 1 root root 917 Nov 5 15:10 gd_io.h > -rw-r--r-- 1 root root 2673 Nov 5 15:10 gdcache.h > -rw-r--r-- 1 root root 490 Nov 5 15:10 gdfontg.h > -rw-r--r-- 1 root root 488 Nov 5 15:10 gdfontl.h > -rw-r--r-- 1 root root 451 Nov 5 15:10 gdfontmb.h > -rw-r--r-- 1 root root 452 Nov 5 15:10 gdfonts.h > -rw-r--r-- 1 root root 484 Nov 5 15:10 gdfontt.h > -rw-r--r-- 1 root root 1260 Nov 5 10:40 jconfig.h > -rw-r--r-- 1 root root 13936 Nov 5 10:40 jerror.h > -rw-r--r-- 1 root root 12458 Nov 5 10:40 jmorecfg.h > -rw-r--r-- 1 root root 46205 Nov 5 10:40 jpeglib.h > drwxrwxr-x 7 root root 4096 Sep 11 11:13 php > -rw-r--r-- 1 root root 124394 Nov 5 10:27 png.h > -rw-r--r-- 1 root root 35093 Nov 5 10:27 pngconf.h > -rw-r--r-- 1 root root 7810 Nov 5 10:18 zconf.h > -rw-r--r-- 1 root root 40898 Nov 5 10:18 zlib.h > > and /usr/local/lib like this: > > [root@mysql lib]# ls -la > total 1728 > drwxr-xr-x 4 root root 4096 Nov 5 15:10 . > drwxr-xr-x 16 root root 4096 Nov 3 12:09 .. > drwxrwxr-x 3 root root 4096 Nov 3 11:57 cvs > -rw-r--r-- 1 root root 209444 Nov 5 15:10 libgd.a > -rw-r--r-- 1 root root 186048 Nov 5 10:40 libjpeg.a > -rwxr-xr-x 1 root root 475 Nov 5 10:40 libjpeg.la > lrwxrwxrwx 1 root root 17 Nov 5 10:40 libjpeg.so -> > libjpeg.so.62.0.0 > lrwxrwxrwx 1 root root 17 Nov 5 10:40 libjpeg.so.62 -> > libjpeg.so.62.0.0 > -rwxr-xr-x 1 root root 158844 Nov 5 10:40 libjpeg.so.62.0.0 > -rw-rw-r-- 1 root root 241528 Nov 5 10:27 libpng.a > lrwxrwxrwx 1 root root 11 Nov 5 10:27 libpng.so -> > libpng.so.2 > lrwxrwxrwx 1 root root 17 Nov 5 10:27 libpng.so.2 -> > libpng.so.2.1.0.8 > -rwxr-xr-x 1 root root 258779 Nov 5 10:27 libpng.so.2.1.0.8 > -rwxr-xr-x 1 root root 632 Nov 5 15:00 libttf.la > lrwxrwxrwx 1 root root 15 Nov 5 15:00 libttf.so -> > libttf.so.2.2.0 > lrwxrwxrwx 1 root root 15 Nov 5 15:00 libttf.so.2 -> > libttf.so.2.2.0 > -rwxr-xr-x 1 root root 553324 Nov 5 15:00 libttf.so.2.2.0 > lrwxrwxrwx 1 root root 13 Nov 5 10:18 libz.so -> > libz.so.1.1.3 > lrwxrwxrwx 1 root root 13 Nov 5 10:18 libz.so.1 -> > libz.so.1.1.3 > -rwxr-xr-x 1 root root 71732 Nov 5 10:18 libz.so.1.1.3 > drwxrwxr-x 11 root root 4096 Sep 11 11:13 php > -rw-r--r-- 1 root root 20133 May 25 11:30 php.ini > > > Among other things I notice it is reading the PHP /ext/gd/gd.c directory. > Why? I built GD, and told configure where to find it. In general I'm not > really sure how the /ext subdirectories work. > > If anyone has any ideas, I'd be really grateful. I have been over every > option, have tweaked makefiles, pawed through the config script, and I > cannot even figure out what configure and make are trying to do here. I've > built these libs a dozen times, and run configure till I'm blue in the face. > I think I know what I'm doing, and I still can't make it work. > > Any ideas? > > ---------- > Steve Lane > Senior Project Manager > Chris Moyer Consulting Inc., Chicago > 833 W. Chicago Ave. Suite 203 > Chicago, IL 60622 > 312 433-2421 (V) slane@fmpro.com > 312 850-3930 (F) http://www.fmpro.com > > *** > Beginner to Advanced FileMaker & Lasso training. > For class and registration information, please visit > http://www.fmpro.com/cmc_classes/, > email training@fmpro.com, or call Josie Graham at 403-467-9301. > *** > > -- > PHP Install Mailing List (http://www.php.net/) > To unsubscribe, e-mail: php-install-unsubscribe@lists.php.net > For additional commands, e-mail: php-install-help@lists.php.net > To contact the list administrators, e-mail: php-list-admin@lists.php.net >