RE: [PHP-GENERAL] going to try one more time about mail problems

I know its hard when you have worked long and hard on stuff and its still not working.. But grouching at people will only mean they dont help. Try to remember. I'd go with what someone has already said they did which was remove the last \ns from the end of your header, have none there at all.. Such as $mailHeader = "From: me@somepc.com"; Im sure its sending a blank line. (if you look in /var/spool/mqueue you should see the files and be able to look at the headers) Liz > -----Original Message----- > From: Wizaerd [mailto:wizaerd@wizaerd.com] > Sent: Thursday, June 01, 2000 15:43 > To: Liz Kimber > Cc: General PHP LIst > Subject: RE: [PHP-GENERAL] going to try one more time about mail > problems > > > The portion under the asterisks was going to be my original response, but > then I decided it sounded too flippant and arrogant. It's just that my > level of frustration has been real regarding this issue since I have not > gotten any closer, and the majority of responses I get are all the same > thing... > > Anyways, I tried: > > // mail test - doesn't work > $mailTo = "wizaerd@wizaerd.com\n"; > $mailSubject = "Testing EMail\n"; > $mailBody = "This is a test from mail()\n"; > $mailHeader = "From: jsheble@zanova.com\n"; > > mail( $mailTo, $mailSubject, $mailBody, $mailHeader ); > > > > $mailBody = "This is a test from popen()\n"; > > // secondary mail test - does work > $MP = "/usr/lib/sendmail -t "; > $fd = popen($MP,"w"); > fputs($fd, "To: " . $mailTo ); > fputs($fd, $mailHeader ); > fputs($fd, "Subject: " . $mailSubject ); > fputs($fd, $mailBody ); > pclose($fd); > > Notice the first and second methods use the same variables. The only > difference is that the popen function adds the To: and Subject: > in the text > because the mail function does that internally (otherwise all the examples > of mail() I've seen on the internet and in books are wrong because they're > never included when using mail()). > > Here are the lines from the /var/log/maillog after trying these > two examples > (I tried it twice): > Jun 1 07:37:06 belgarath sendmail[4017]: HAA04017: from=nobody, size=92, > class=0, pri=92, nrcpts=0, > msgid=<200006011437.HAA04017@belgarath.sorcery>, > relay=nobody@localhost > Jun 1 07:37:06 belgarath sendmail[4018]: HAA04018: from=nobody, size=87, > class=0, pri=30087, nrcpts=1, > msgid=<200006011437.HAA04018@belgarath.sorcery>, relay=nobody@localhost > Jun 1 07:37:08 belgarath sendmail[4020]: HAA04018: > to=wizaerd@wizaerd.com, > ctladdr=nobody (99/99), delay=00:00:02, xdelay=00:00:02, mailer=esmtp, > relay=mail1.itool.com. [207.113.118.44], stat=Sent (Message received > successfully) > Jun 1 07:38:12 belgarath sendmail[4027]: HAA04027: from=nobody, size=104, > class=0, pri=104, nrcpts=0, > msgid=<200006011438.HAA04027@belgarath.sorcery>, > relay=nobody@localhost > Jun 1 07:38:12 belgarath sendmail[4028]: HAA04028: from=nobody, size=100, > class=0, pri=30100, nrcpts=1, > msgid=<200006011438.HAA04028@belgarath.sorcery>, relay=nobody@localhost > Jun 1 07:38:15 belgarath sendmail[4030]: HAA04028: > to=wizaerd@wizaerd.com, > ctladdr=nobody (99/99), delay=00:00:03, xdelay=00:00:03, mailer=esmtp, > relay=mail1.itool.com. [207.113.118.44], stat=Sent (Message received > successfully) > > > ************************************************************************ > ************************************************************************ > I'm not quite sure what you're advising here. The From, Reply-To and > X-Mailer sections of this email are already exactly the same. The To > portion does not have a newline on it because the mail function claims it > doesn't require one (but just for that sake of argument, I tried adding it > with zero results). Also for the sake of argument, others have said they > took this code precisely as it's listed here, and plugged it into > their own > PHP scripts and the mail() portion worked. I have tried sending > mail using > simpler examples, with no additional header information, lots of > additional > information, variables, literals, and the results have always > been the same. > The mail() will not send email. So again it points to my > configuration. At > this point, I'm merely looking for an explanation as to why one method > works, the other does not. How can it be a configuration problem if the > command line method and the popen method work? > > > > > You never replied to my mail to you asking you to try something.. > > > > What happens when you set the mail style part to be exactly the > > same as the > > fputs version? > > > > Your logs show that its trying to send stuff, but not what > > happens with it. > > Thats the From Nobody bit.. its not picking up the right stuff. > > > > Also, try removing the last \n from the header section as it could be > > putting a blank line in the wrong place in the headers and > > upsetting it all. > > > > liz > > > > > -----Original Message----- > > > From: Wizaerd [mailto:wizaerd@wizaerd.com] > > > Sent: Thursday, June 01, 2000 15:07 > > > To: General PHP LIst > > > Subject: [PHP-GENERAL] going to try one more time about mail problems > > > > > > > > > I have asked this several times and while there have been some cursory > > > answers, there's been nothing replied or answered that has either > > > explained > > > this or fixed this. Before you read on though, here are a couple > > > of answers > > > I'll give outright since they are the only questions everybody asks > > > imeediately. > > > > > > 1) Yes, the sendmail_path in php.ini has been properly setup. > > > 2) I have included log entries at the bottom of this email and > > some brief > > > explanations of what I think occurred. > > > > > > I can successfully send emails from the command line using sendmail. I > > > however cannot send emails using PHP's (version 4) mail() > function. It > > > doesn't send any mail if I use this code. > > > > > > $mailTo = "wizaerd@wizaerd.com"; > > > $mailSubject = "Testing EMail"; > > > $mailBody = "This is a test of the EMail system from a PHP script\n"; > > > $mailBody .= "PHP Version " . phpversion(); > > > $mailHeader = "From: jsheble@zanova.com\n"; > > > $mailHeader .= "Reply-To: jsheble@zanova.comn\n"; > > > $mailHeader .= "X-Mailer: PHP/" . phpversion() . "\n\n"; > > > mail( $mailTo, $mailSubject, $mailBody, $mailHeader ); > > > > > > However, if I use this code it does work: > > > > > > $MP = "/usr/lib/sendmail -t "; > > > $fd = popen($MP,"w"); > > > fputs($fd, "To: wizaerd@wizaerd.com\n"); > > > fputs($fd, "From: jsheble@zanova.com\n"); > > > fputs($fd, "Reply-To: jsheble@zanova.com\n"); > > > fputs($fd, "Subject: Test EMail\n"); > > > fputs($fd, "X-Mailer: PHP/".phpversion()."\n\n"); > > > fputs($fd, "This is a test\n"); > > > pclose($fd); > > > > > > If the one section of code works and the other does not, not > to mention > > > sending mail from the command line works, then most likely it is not a > > > sendmail configuration problem. I have nbeen told that the second > > > method is > > > all that sendmail really does behind the scenes for the mail() > > > anyways, but > > > I was also told that the second approach would be more intensive (CPU > > > cycles, memory footprints, etc... I dunno why, I just know > > what I've been > > > told). > > > > > > Her are the entries from my /var/log/maillog, and I'm afraid it > > > has not been > > > very useful to me at all, perhpas someone here can more more > > sense of it: > > > > > > The entries that have 'to=wizaerd@wizaerd.com' entry in the > log are ones > > > I've sent from the command line. The ones with 'from=nobody' > > are the ones > > > that were tried using a PHP script (the one whose code I included that > > > didn't work) and the ones with 'from=root' were sent with the > > > popen function > > > (the code I included that did go through). It looks like it would be a > > > configuration problem, but if it were, then the command line > wouldn't be > > > working either, right? Nor would the code using the popen method. > > > > > > May 29 22:41:15 belgarath sendmail[461]: starting daemon (8.9.3): > > > SMTP+queueing@01:00:00 > > > May 29 22:41:37 belgarath sendmail[579]: WAA00579: from=root, size=21, > > > class=0, pri=30021, nrcpts=1, > > > msgid=<200005300541.WAA00579@belgarath.sorcery>, relay=root@localhost > > > May 29 22:41:37 belgarath sendmail[579]: WAA00579: > > to=wizaerd@wizaerd.com, > > > delay=00:00:00, mailer=smtp, stat=queued > > > May 29 22:41:42 belgarath sendmail[580]: WAA00579: > > to=wizaerd@wizaerd.com, > > > ctladdr=root (0/0), delay=00:00:05, xdelay=00:00:02, mailer=smtp, > > > relay=mail1.itool.com. [207.113.118.44], stat=Sent (Message received > > > successfully) > > > May 29 22:43:00 belgarath sendmail[586]: WAA00586: from=nobody, > > > size=135,class=0, pri=135, nrcpts=0, > > > msgid=<200005300543.WAA00586@belgarath.sorcery>, > relay=nobody@localhost > > > May 29 23:01:54 belgarath sendmail[695]: XAA00695: from=nobody, > > size=163, > > > class=0, pri=163, nrcpts=0, > > > msgid=<200005300601.XAA00695@belgarath.sorcery>, > > > relay=nobody@localhost > > > May 29 23:02:29 belgarath sendmail[701]: XAA00701: from=nobody, > > size=163, > > > class=0, pri=163, nrcpts=0, > > > msgid=<200005300602.XAA00701@belgarath.sorcery>, > > > relay=nobody@localhost > > > May 29 23:03:01 belgarath sendmail[707]: XAA00707: from=nobody, > > size=163, > > > class=0, pri=163, nrcpts=0, > > > msgid=<200005300603.XAA00707@belgarath.sorcery>, > > > relay=nobody@localhost > > > May 29 23:05:27 belgarath sendmail[720]: XAA00720: from=nobody, > > size=163, > > > class=0, pri=163, nrcpts=0, > > > msgid=<200005300605.XAA00720@belgarath.sorcery>, > > > relay=nobody@localhost > > > > > > I'm afraid that if I do not get this rectified, I am going to have to > > > abandon PHP on this project or even this project altogether. > > > > > > Thanx > > > Joseph (Joe) Sheble > > > a.k.a. Wizaerd > > > ======================================== > > > Wizaerd's Realm > > > http://www.wizaerd.com > > > 3D Art, ColdFusion, Illustration, Canvas > > > a little bit of everything... > > > ======================================== > > > ColdFusion Developer > > > Zanova, Inc. > > > http://www.ZanovaInc.com > > > Moving your business forward... > > > ======================================== > > > > > > > > > -- > > > PHP General Mailing List (http://www.php.net/) > > > To unsubscribe, e-mail: php-general-unsubscribe@lists.php.net > > > For additional commands, e-mail: php-general-help@lists.php.net > > > To contact the list administrators, e-mail: > php-list-admin@lists.php.net > > > > > > > > > -- > > PHP General Mailing List (http://www.php.net/) > > To unsubscribe, e-mail: php-general-unsubscribe@lists.php.net > > For additional commands, e-mail: php-general-help@lists.php.net > > To contact the list administrators, e-mail: php-list-admin@lists.php.net > > > -- > PHP General Mailing List (http://www.php.net/) > To unsubscribe, e-mail: php-general-unsubscribe@lists.php.net > For additional commands, e-mail: php-general-help@lists.php.net > To contact the list administrators, e-mail: php-list-admin@lists.php.net >